Author Topic: 1972 cz250 ignition  (Read 2512 times)

0 Members and 1 Guest are viewing this topic.

Offline k2000x

  • A-Grade
  • ****
  • Posts: 467
    • View Profile
1972 cz250 ignition
« on: July 07, 2014, 03:51:39 pm »
Who makes the cheapest cz 250 replacement ignition and were can I get it 980 motor yellow tanker

Offline tony27

  • Legend
  • *****
  • Posts: 1908
    • View Profile
Re: 1972 cz250 ignition
« Reply #1 on: July 07, 2014, 04:38:02 pm »
Electrexworld does an ignition including the flywheel for 195gbp, planning on buying 1 later in the year
http://www.electrexworld.co.uk/cgi-bin/sh000001.pl?REFPAGE=http%3a%2f%2fwww%2eelectrexworld%2eco%2euk%2f&WD=cz&PN=STK%2d950%2ehtml%23aSTK_2d950#aSTK_2d950

Powerdynamo does their own which look to be what the guys in Poland sell on ebay etc, cost is 310euro so quite a lot dearer. Personally I don't like the look of the magnets in the flywheel, they look to be stuck to the inside suface rather than sunken into it
http://www.powerdynamo.biz/eng/systems/7209/72095main.htm

Offline Noel

  • Legend
  • *****
  • Posts: 953
    • View Profile
Re: 1972 cz250 ignition
« Reply #2 on: July 07, 2014, 04:46:30 pm »
Suzuki.
TS 185 ER

Offline k2000x

  • A-Grade
  • ****
  • Posts: 467
    • View Profile
Re: 1972 cz250 ignition
« Reply #3 on: July 07, 2014, 05:11:41 pm »
done the er185 mod years ago worked ok but looking for something better
« Last Edit: July 07, 2014, 05:13:59 pm by k2000x »

Offline VMX60

  • A-Grade
  • ****
  • Posts: 483
    • View Profile
« Last Edit: July 07, 2014, 06:09:10 pm by VMX60 »

Offline Moto

  • A-Grade
  • ****
  • Posts: 326
    • View Profile
Re: 1972 cz250 ignition
« Reply #5 on: July 07, 2014, 07:00:41 pm »
Cross the Electrex off your list,a friend bought one and it didn't work properly.After much heartache he got it tested and found it had a crazy advance curve which made the bike run poorly.No reply,no refund and no communication from the English supplier.An expensive paperweight.

Offline tony27

  • Legend
  • *****
  • Posts: 1908
    • View Profile
Re: 1972 cz250 ignition
« Reply #6 on: July 07, 2014, 07:29:40 pm »
Cross the Electrex off your list,a friend bought one and it didn't work properly.After much heartache he got it tested and found it had a crazy advance curve which made the bike run poorly.No reply,no refund and no communication from the English supplier.An expensive paperweight.
So that's HPI off the list as well, photos & part numbers are the same as electrexworld

Simo63

  • Guest
Re: 1972 cz250 ignition
« Reply #7 on: July 07, 2014, 07:46:55 pm »
I had a PVL fitted to my CZ250 and I still have one fitted to my CZ400.  Both have been great BUT you miss the flywheel weight.

Food for thought?

Offline Lozza

  • Legend
  • *****
  • Posts: 4206
    • View Profile
Re: 1972 cz250 ignition
« Reply #8 on: July 07, 2014, 08:56:00 pm »
Li-Po battery, programmable ignition pick up of any bike and any flywheel with a external lobe. About $400 less if you are inventive. 
Jesus only loves two strokes