Author Topic: m12 x 1.00mm nyloc nuts  (Read 2320 times)

0 Members and 1 Guest are viewing this topic.

Offline Brian Watson

  • Legend
  • *****
  • Posts: 749
  • First Penton in OZ
    • View Profile
m12 x 1.00mm nyloc nuts
« on: May 28, 2014, 10:36:12 am »
Have been trying to get a couple of M12 x 1.00mm nyloc nuts for the swing arm pivot on the 83 510 ....can't seem to find them anywhere..any leads..??

Offline cyclegod

  • Legend
  • *****
  • Posts: 2530
  • Sunny PERTH W.A
    • View Profile
    • cyclegod on "youtube"
Re: m12 x 1.00mm nyloc nuts
« Reply #1 on: May 28, 2014, 01:45:16 pm »
Thats is a very fine thread for that size nut ?, most are going to be 1.75mm coarse thread or 1.25mm fine thread, you might have to go to the dealer for those or try a fastner specific store who can measure the thread.
Ban BLACK rims NOW

Offline Brian Watson

  • Legend
  • *****
  • Posts: 749
  • First Penton in OZ
    • View Profile
Re: m12 x 1.00mm nyloc nuts
« Reply #2 on: May 28, 2014, 05:39:59 pm »
They are for the swingarm pivot.. specifies m12 x 1.0mm in the parts book.. I understand that in suspension setups this is what has been used..may go along the line of this..one of the guys in the club here sells/makes bolts..he is going to make me a new pivot shaft , with m12 x 1.25.. nylocs are readily available for that size.. :D

Offline PEZBerq

  • Legend
  • *****
  • Posts: 1094
  • Brisbane
    • View Profile
Re: m12 x 1.00mm nyloc nuts
« Reply #3 on: May 28, 2014, 07:34:15 pm »
You can get them from Philip at husqvarna-parts.com He has them in stock for $3.50 each.
Husqvarnas: 78 390AMX, 82 430XC, 84 240WR, 84 500AE, 84 510TE, 87 510TE