« previous next »
Pages: [1]   Go Down

Author Topic: TM250 Heads and mods  (Read 1814 times)

0 Members and 1 Guest are viewing this topic.

Offline ninjamk

  • C-Grade
  • **
  • Posts: 56
    • View Profile
TM250 Heads and mods
« on: February 25, 2014, 04:52:18 pm »
Does anyone know if there are any differences between 72-73 and 74-75 TM250 heads other than the fin layout?  Squish or combustion chamber volume? Does one cool better than the other?  Also does anyone have any experience with reworking the head or porting on the 72-73?  Wondering if there is much to gain or the results.  Just some curiosity I have.
Logged
Bikes: 1972 TS/TM250, 2007 KLX300, 2016 GSX-S1000

oldfart

  • Guest
Re: TM250 Heads and mods
« Reply #1 on: February 25, 2014, 05:09:57 pm »
contact   " Lozza  " on this forum.
Logged

Offline ninjamk

  • C-Grade
  • **
  • Posts: 56
    • View Profile
Re: TM250 Heads and mods
« Reply #2 on: February 27, 2014, 03:02:50 pm »
Thanks Mate!  :D
Logged
Bikes: 1972 TS/TM250, 2007 KLX300, 2016 GSX-S1000

Offline oldyzman

  • Legend
  • *****
  • Posts: 2187
  • 250 two stroke!
    • View Profile
Re: TM250 Heads and mods
« Reply #3 on: February 27, 2014, 07:19:47 pm »
The fins on the head of the 73 seem different to my 74... I am a newbie to TM's
Brett
Logged
I have a soft spot japanese mxers with aluminium tanks. Two stroke classic Dirt Track...

Offline Vintmxman

  • C-Grade
  • **
  • Posts: 111
    • View Profile
Re: TM250 Heads and mods
« Reply #4 on: February 27, 2014, 08:26:25 pm »
Absolutely no difference in performance in all aspects. If you want to up the compression a bit on either of the heads mentioned, your best increase to performance would be to deck the by 10mm and advance the timing a couple of degrees. My 2 cents
Logged
Pages: [1]   Go Up
« previous next »