Wanted - TS250/TM250(early)/RL250 magneto cover

[Doc]

I may not use it on the RL Tim but I have a '72/'73 TM250 long term project it could certainly be used on I think the only other biggy I need for this project is a pipe but something will turn up. I have a TS250 pipe and while it would really suck to fit it at least I'd breeze through under 96db

[Tim754]

Will post it to ya ;)Tim          Doc save your bikkies (that is coming from a hopeless money saver...) and well a GMC pipe .  You will be pleased. 

[Doc]

Tim I was looking at a NOS TS250 kit pipe the other day for $199 buy now $60 postage. If I were a little better off I would have swooped but $250 is still $250 and I budget around the 100 mark for a used pipe. Unfortunately the costing rules out Geoff's lovely pipes also but ya get that. What I liked most about this particular kit pipe was it exited to the left. The only 1 I'd ever seen do this 

[pokey]

I reckon we could knock up a decent glass seat base doc . a steel one in decent nick for an RL my be  asking a bit too much.. would only need a can of bog to patch up the existing  for a decent mould and about two metres of 450CSM and a litre of resin and  a bit of scrap flat bar for some ears.

 i think i have worked out why she was painted yellow. beamish look alike 

[Doc]

mmm..I dunno whether the owner/painter would have even known of the Beamish RL's existance Pokey. A lot of these were black and red but yes, some yellow with larger triangular sidecovers. Be nice to find an RL325 motor eh! will think about the fibreglass base cause the seat is a bit of an eyesore that bothers me greatly. I was going to recover till I peaked udderneath and ucky, nice home for funnelbacks or redwebs so I sprayed it with Mortein and refitted it pronto 

[pokey]

Beamish 325


Just think of the rust holes as racing holes

 Only take a a sunny day to knock up a small part like that, I think i still have a few mtres of cloth and  some resin at my bro's  but be easier to grab  some over this side of the creek,is a place over at Hemmant
 about $7 for 500ml resin and about $12 for 2mtrs 450 CSM  and a little bottle of MEK catalyst for $3. That will have a nice strong lightweigt and rust free base without anyplaces for kangawallafoxes  to hide 
 

[Tim754]

Hey Pokey do a TM75 one too please just pinch one of Docs Minicycles as a template Cheers Tim

[pokey]

enough cloth and resin  and no prob Tim. just aslong as it aint got any bloody metal stand offs. They are a bitch to get to stay in the right spot.

 the base i made for the 185 was a big lurning curve with bloody stand offs, Ears are dead easy