« previous next »
Pages: [1]   Go Down

Author Topic: Tank cracks  (Read 1095 times)

0 Members and 1 Guest are viewing this topic.

3858

  • Guest
Tank cracks
« on: May 10, 2013, 05:58:44 pm »
Has anyone had luck repairing plastic tanks that have cracked.

I have heard of the problem but never seen it with a crack running right next to where the tanks sticker had been.

The bike in question  is  a Yz250 L...
Logged

Offline ji107

  • C-Grade
  • **
  • Posts: 79
    • View Profile
Re: Tank cracks
« Reply #1 on: May 10, 2013, 09:09:38 pm »
A common problem on YZ's and IT's. Often the cracks don't go all the way through. mainly a problem when they get hot.
Can be welded with Poly Ethlyne rod, quite sucessful. Some people may even have the right colour rod.

J I
Logged

Offline dkupf

  • A-Grade
  • ****
  • Posts: 373
  • Kinka Beach Qld
    • View Profile
Re: Tank cracks
« Reply #2 on: May 11, 2013, 03:07:50 pm »
I've had a couple of plastic Hodaka tanks welded up. In no time at all they split again down the side of the weld :'(. Darcy
Logged
I might not be winning,But I'll be grinning

Offline popeye

  • Legend
  • *****
  • Posts: 975
  • 1-2-3 wheel's l don't care...All good fun.
    • View Profile
Re: Tank cracks
« Reply #3 on: May 13, 2013, 09:03:11 am »
My CR125 89 did the same, l used some Devcon, mixed it up and forced it into the crack and so far so good....
Logged
IN IT FOR THE FUN OF IT. LIKE MR NIKE SAYS JUST DO IT.

3858

  • Guest
Re: Tank cracks
« Reply #4 on: May 13, 2013, 01:49:39 pm »
Thanks for all the advice.....over the weekend the tank seriously cracked about another six inches either side..... >:(

I think the re-introduction of the fuel to the tank pushed it over the edge...dang it....  Clarke tank now on the way...
Logged
Pages: [1]   Go Up
« previous next »