« previous next »
Pages: [1]   Go Down

Author Topic: 1977 Fork Oil specs ?  (Read 2515 times)

0 Members and 1 Guest are viewing this topic.

Offline Husabergpete

  • Legend
  • *****
  • Posts: 561
    • View Profile
1977 Fork Oil specs ?
« on: December 17, 2011, 02:05:05 pm »
Gents,  what is your recommendation for capacity and grades for the forks on a 1977 AW 250 - will be raced at Heaven - understand there will be variables but a good starting point would be very much appreciated.

Pete
Logged
KTM 250 1980,  Maico 250 AW 1977, Husqvarna CR 430 1981, , CZ 250 1973 and a 550 Husaberg

Offline Turtle.Inc

  • B-Grade
  • ***
  • Posts: 202
    • View Profile
Re: 1977 Fork Oil specs ?
« Reply #1 on: December 17, 2011, 03:09:03 pm »
Will check manual later but usually good starting point 140mm from top of tube with fork full compressed, no spring

Cheers Ross
Logged
Always looking for Maico parts/bikes, cash paid

Offline Husabergpete

  • Legend
  • *****
  • Posts: 561
    • View Profile
Re: 1977 Fork Oil specs ?
« Reply #2 on: December 17, 2011, 03:38:37 pm »
Rosco,

Thanks for that. Just put them together with Castrol 15 weigh fork oil and 148mm from the top - full compressed -spring out - around 400cc of oil. Will get deano to check what he thinks. Feel good at this start point.

Ta Pete
Logged
KTM 250 1980,  Maico 250 AW 1977, Husqvarna CR 430 1981, , CZ 250 1973 and a 550 Husaberg

Offline Husabergpete

  • Legend
  • *****
  • Posts: 561
    • View Profile
Re: 1977 Fork Oil specs ?
« Reply #3 on: December 17, 2011, 06:27:50 pm »
BIG improvement !!!!!!!   pulled the top caps apart - grub screw into a  light spring into a 6mm ball bearing. Cleaned oiled and now working well. ta pete
Logged
KTM 250 1980,  Maico 250 AW 1977, Husqvarna CR 430 1981, , CZ 250 1973 and a 550 Husaberg
Pages: [1]   Go Up
« previous next »