« previous next »
Pages: [1]   Go Down

Author Topic: Betor triple clamps.  (Read 1117 times)

0 Members and 1 Guest are viewing this topic.

Curly3

  • Guest
Betor triple clamps.
« on: November 05, 2011, 10:14:02 pm »
Is the headstock shaft screwed into or a shrink fit into the bottom triple clamp?
I need an extra 3mm to allow full thread on the top lock nut.
We all need a bit of extra length occasionally. :P
Logged

Offline matcho mick

  • Legend
  • *****
  • Posts: 2279
    • View Profile
    • Moto Tumbi
Re: Betor triple clamps.
« Reply #1 on: November 05, 2011, 10:33:14 pm »
think it has a step to stop it pulling through,i'll go & check,back in a tad ;D, :P
Logged
work,the curse of the racing class!!
if a hammer dosn't fix it,you have a electrical problem!!

Offline matcho mick

  • Legend
  • *****
  • Posts: 2279
    • View Profile
    • Moto Tumbi
Re: Betor triple clamps.
« Reply #2 on: November 05, 2011, 10:43:46 pm »
has a circlip approx 3mm in,i'd say press fit,looks like the later bottoms also clamped as per top triple, :P
Logged
work,the curse of the racing class!!
if a hammer dosn't fix it,you have a electrical problem!!

Curly3

  • Guest
Re: Betor triple clamps.
« Reply #3 on: November 05, 2011, 11:03:20 pm »
Good to See you home safe Mick, lucky bastard.
My clamps are 35mm and don't appear to involve a circlip.

Logged

Offline matcho mick

  • Legend
  • *****
  • Posts: 2279
    • View Profile
    • Moto Tumbi
Re: Betor triple clamps.
« Reply #4 on: November 05, 2011, 11:31:54 pm »
yep,justa nother lucky bastard ;D,push the stem down through the bottom triple,that will expose the circlip slidey,probably a good idea to convert the bottom to clamping same as top tree arrangement, :P
Logged
work,the curse of the racing class!!
if a hammer dosn't fix it,you have a electrical problem!!

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: Betor triple clamps.
« Reply #5 on: November 10, 2011, 03:13:44 pm »
Are you making the stem longer ? if so keep us posted, i got some betors triples i wanted to put in a Champion frame but there too short, or it needs a longer stem.... but thats as far as i got with it.

Happy to steal your ideas when you have it sorted out.
« Last Edit: November 10, 2011, 03:17:34 pm by Freakshow »
Logged
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff
Pages: [1]   Go Up
« previous next »