Author Topic: Where are the places to buy parts for CR125M 1974  (Read 9295 times)

0 Members and 1 Guest are viewing this topic.

Offline smed

  • Legend
  • *****
  • Posts: 1646
    • View Profile
Re: Where are the places to buy parts for CR125M 1974
« Reply #30 on: January 16, 2011, 06:36:25 pm »
Just checked my stator off running bike,black/red -red/white 157.4.     black/red -green open. red/white - green 140.4. usually they qoute within +/- 10%,so yours should be o.k.

Offline Rossvickicampbell

  • Legend
  • *****
  • Posts: 3779
    • View Profile
Re: Where are the places to buy parts for CR125M 1974
« Reply #31 on: January 16, 2011, 06:37:02 pm »
Tony - if you decide to go PVL just drop Lozza (from this forum) a line first - tell him I sent you (and when he stops laughing) he maybe able to help.

cheers mate
1974 Yamaha YZ360B
1980 Honda CR250R - Moto X Fox Replica

Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
Re: Where are the places to buy parts for CR125M 1974
« Reply #32 on: January 16, 2011, 06:46:23 pm »
Just checked my stator off running bike,black/red -red/white 157.4.     black/red -green open. red/white - green 140.4. usually they qoute within +/- 10%,so yours should be o.k.

You are deadset legend Smed  8)

Well that only leaves one place - CDI and wiring - possibly earths - Doh that's three places  ::)

At least I can rule out the stator - relief  8)
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
The only triple jumps he would have been doing are the hop, skip & jump.

Offline JohnnyO

  • Legend
  • *****
  • Posts: 4658
  • Qld
    • View Profile
Re: Where are the places to buy parts for CR125M 1974
« Reply #33 on: January 16, 2011, 09:40:07 pm »
Just checked my stator off running bike,black/red -red/white 157.4.     black/red -green open. red/white - green 140.4. usually they qoute within +/- 10%,so yours should be o.k.

You are deadset legend Smed  8)

Well that only leaves one place - CDI and wiring - possibly earths - Doh that's three places  ::)

At least I can rule out the stator - relief  8)
Don't always assume the stator is good because the ohms reading is within spec. I had to replace one last week that tested ok but the bike wouldn't run, as soon as i replaced the stator the bike started and ran perfect.

TM BILL

  • Guest
Re: Where are the places to buy parts for CR125M 1974
« Reply #34 on: January 18, 2011, 02:44:57 pm »
Just checked my stator off running bike,black/red -red/white 157.4.     black/red -green open. red/white - green 140.4. usually they qoute within +/- 10%,so yours should be o.k.

You are deadset legend Smed  8)

Well that only leaves one place - CDI and wiring - possibly earths - Doh that's three places  ::)

At least I can rule out the stator - relief  8)
Don't always assume the stator is good because the ohms reading is within spec. I had to replace one last week that tested ok but the bike wouldn't run, as soon as i replaced the stator the bike started and ran perfect.
 

I find substitution with a known good part is the only way to acuratley confrirm if an electrical part is suspect . As Jonnny O says test can be very time consuming and missleading , Tony there must be somone your way who can lend you some parts to substitute  ;)

Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
Re: Where are the places to buy parts for CR125M 1974
« Reply #35 on: January 18, 2011, 02:59:22 pm »
Thanks for busting my bubble Bill  ;D ;D  I was happy not to have to replace the stator  ::)

Brad did offer I might just take him up on it.
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
The only triple jumps he would have been doing are the hop, skip & jump.

090

  • Guest
Re: Where are the places to buy parts for CR125M 1974
« Reply #36 on: January 18, 2011, 09:29:02 pm »
I did!