Author Topic: oil mix for cz 250  (Read 2545 times)

0 Members and 1 Guest are viewing this topic.

shakeyCZ

  • Guest
oil mix for cz 250
« on: September 18, 2010, 11:04:20 pm »
Hi all just a quick one what ratio is the 2 stroke mix 20:1 or 50:1 or somethink else?

Offline HL400

  • B-Grade
  • ***
  • Posts: 241
    • View Profile
Re: oil mix for cz 250
« Reply #1 on: September 19, 2010, 05:55:36 pm »
Hi there CZ love 20 to 1.  mineral base oil.  HL

Offline NR555

  • A-Grade
  • ****
  • Posts: 341
    • View Profile
Re: oil mix for cz 250
« Reply #2 on: September 21, 2010, 09:53:31 am »
Yep, richer side of life is the way to go.  We run leaded race fuel with good old Castrol A747 (synth/castor blend) @ 25:1.

I found I was glazing the bore really badly on full synth; tried a few different types with the same result.

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: oil mix for cz 250
« Reply #3 on: September 21, 2010, 12:03:02 pm »
A lot of that era euro stuff runs 25 to 1 for road use. If your racing i would go to 20 to 1. Yes rings wont bed in with sythetic and you will get glazing. Some people say bikes smoke too much with 20 to 1 but when ever i run bikes with that ratio with just a basic 2T oil there seems to be stuff all smoke at all, even at idling/low revs.
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline shortshifter

  • Legend
  • *****
  • Posts: 667
  • Sunshine Coast QLD
    • View Profile
Re: oil mix for cz 250
« Reply #4 on: September 21, 2010, 06:20:59 pm »
I'm runing 30:1 full synth but haven't pulled a barrell of in some time so I don't know what the glazing situation is.bikes seem to run strong on this.