WTB - Rolling frame IT175/200/250 PE175 KDX200

[gerpster]

Looking for a roller from 1 of the following for a project....let me know if you have anything...anything considered..prefer single shock...
IT175 77-83
IT200 84-87
IT250 77-83
PE175 82-84
KDX200 83-97

Cheers..
Greg.

[rocketfrog]

Are you going to transplant with a 4 stroke? I have an IT 250K (83) Frame, Tank, Seat and Forks. not really a roller I know, but if you find an IT for a doner chassis, I have some bits that may help you out. (Newcastle area) 

[gerpster]

A KDX200 or PE175 frame and triple tree would probably do fine so no need to be a roller......anything out there?   

[Husky500evo]

I have what I think is an '84 KDX200 frame, swingarm, triple-clamps, shock & top rocker/linkage, for $100 if you are interested . The shock shaft has some rust on it & the top rocker needs some bushes made for it (as the original needle rollers are N.L.A ). I also have an '83 KDX250 frame & swingarm.  I am located in North Queensland, so freight might be a bit expensive.   

[gerpster]

Husky the 84 KDX200 sounds perect...thanks for posting...now how to get it down to ACT is another story....    Will send a PM...