IT250H/YZ250 Bits

[dave]

I'm after a variety of bits for my IT250H and a YEIS bottle plus joiner pipe into the manifold is one of them. I'm also after a carbie for it and these bits;

*front brake hub backing plate
*gear shifter shaft
*front chain guide (front of swingarm)
*swingarm bearings/bushes
*front sprocket cover
*whole carbie or carbie slide spring/pilot jet/main jet/float
*conrod kit
*1.50mm OS Piston Kit
*cables (throttle/clutch/front brake)
*all engine oil seals and gaskets

Thanks Dave

[Viper666]

Most of that stuff is available from Yamaha dealers.

*front brake hub backing plate  Ebay or wreckers (Single leading edge) Do you want the speedo drive?
*gear shifter shaft  Should be avail from dealer but can weld new end on  http://cgi.ebay.com/ebaymotors/83-YAMAHA-YZ250-YZ-250-TRANSMISSION-GEAR-SHIFT-SHAFT_W0QQitemZ370246462125QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item563468aaad&_trksid=p3911.c0.m14
*front chain guide (front of swingarm)   On ebay all the time but I bought from dealer  Yamatopdog (Speed & Sport USA)
*swingarm bearings/bushes    Dealer (Expensive) Ebay or Yamatopdog  http://216.168.60.165/speedandsportinc/index.tpl or  http://www.x-tremevintageyz.com/products.php
*front sprocket cover Same as YZ, Ebay
*whole carbie or carbie slide spring/pilot jet/main jet/float   Ebay
*conrod kit  Definitely avail from dealer
*1.50mm OS Piston Kit  Wuseco from dealer about $150-$175
*cables (throttle/clutch/front brake)   Ebay or dealer
*all engine oil seals and gaskets Dealer

Use this link to chase part numbers

http://www.yamaha-motor.com/sport/parts/home.aspx

Viper666

[Viper666]

Bottle


http://cgi.ebay.com/ebaymotors/83-YAMAHA-IT250-YZ250-INTAKE-AIR-CHAMBER-BOOST-BOTTLE_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem1c082a7da1QQitemZ120396086689QQptZMotorcyclesQ5fPartsQ5fAccessories

Shift shaft

http://cgi.ebay.com/ebaymotors/83-YAMAHA-YZ250-YZ-250-TRANSMISSION-GEAR-SHIFT-SHAFT_W0QQitemZ370246462125QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item563468aaad&_trksid=p3911.c0.m14

[dave]

Thanks for the tips. I knew I could get these bits new. Just thought someone out there might be looking to offload old/new spares etc. Hey Viper have you dealt with X-TremeVintageYZ.com before? How long does it take to get bits?

[Viper666]

Yes and they are good to deal with, their singarm kits are quality parts. Haven't bought other stuff but they have a good rep.

Viper666

[Viper666]

This might help

http://www.yamahait.com.au/manuals.html

[DIRTPILOT72]

I can get throttle, clutch, speedo cables. Full gasket kit, all bearings except swingarm, chain and sprockets, chain rollers. Pm me if you interested.