Author Topic: TT/XT 500 question  (Read 1248 times)

0 Members and 1 Guest are viewing this topic.

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
TT/XT 500 question
« on: April 09, 2009, 08:03:24 pm »
can any one tell me the width of the triple clamps/forks on the TT/XT 500?

eg the inside width of between the chrome legs. from that i can add on 36mm and that will give me the center to center spacing. thanks!
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline brent j

  • Legend
  • *****
  • Posts: 1435
  • Darwin, NT. Suzuki tragic, RL250M TS90MX PE250B
    • View Profile
Re: TT/XT 500 question
« Reply #1 on: April 09, 2009, 08:07:44 pm »
I'll try and measure the width this weekend, not sure when though. I need to get a bike out from under the house. None of my race bikes use standard clamps
I have both types here, inline forks and offset. I don't think there is any difference as they both use the same front wheel.

Brent
The older I get, the faster I was

Offline mick25

  • Legend
  • *****
  • Posts: 1162
  • Hunter valley NSW
    • View Profile
Re: TT/XT 500 question
« Reply #2 on: April 09, 2009, 08:14:41 pm »
Its 150mm between chrome sliders at the top of triples ;)

Offline mick25

  • Legend
  • *****
  • Posts: 1162
  • Hunter valley NSW
    • View Profile
Re: TT/XT 500 question
« Reply #3 on: April 09, 2009, 08:19:39 pm »
Brentj can you check your forum messages i sent you a question

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: TT/XT 500 question
« Reply #4 on: April 09, 2009, 08:27:17 pm »
need the answer tonight, so thanks Mick

so 150 + 36 = 186 between center to center. ;)
« Last Edit: April 09, 2009, 08:31:19 pm by LWC3077 »
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022