« previous next »
Pages: [1]   Go Down

Author Topic: Carby ...ID  (Read 1404 times)

0 Members and 1 Guest are viewing this topic.

390 ROCKET

  • Guest
Carby ...ID
« on: March 16, 2009, 12:05:31 pm »
Hi guys
I have a Mikuni 38mm carby...? that I need parts for I have been told may have come off
an early 80's RM 250.?
just wondering if anyone can confirm..Very hard to make out any numbers
but the needle and seat has 3.3 marked under it and I think the main jet said 43
other marks on the exterior of the carby reads
 38  I think
 94                                 
 other markings are  1t
                             2...?
Sorry about the lack of info
Cheers
 Rick
Logged

Offline jimg1au

  • Legend
  • *****
  • Posts: 3489
    • View Profile
Re: Carby ...ID
« Reply #1 on: March 16, 2009, 12:41:09 pm »
what parts do you need as i just ring the agents in south aust and order mikuni parts and they send them.
Logged

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Carby ...ID
« Reply #2 on: March 16, 2009, 12:43:44 pm »
www.iwt.com.au for Mikuni parts/info/help

RM 250/400 were 36mm up to 1980
« Last Edit: March 16, 2009, 01:09:15 pm by LWC3077 »
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Doc

  • Guest
Re: Carby ...ID
« Reply #3 on: March 17, 2009, 07:27:42 am »
if it has a round slide and is not a flat slide then the only RM250 carb it could be would be the '81 X model,  in '82 they changed to flatslide type carbs ;)
Logged

Offline pokey

  • Legend
  • *****
  • Posts: 1462
  • Arse .. Elbow. Know the difference
    • View Profile
    • FB
Re: Carby ...ID
« Reply #4 on: March 17, 2009, 07:45:49 am »
yamaha carbs have numbers that reflect the model designation. ;)
Logged
Pages: [1]   Go Up
« previous next »