« previous next »
Pages: [1]   Go Down

Author Topic: rm shocks  (Read 1558 times)

0 Members and 1 Guest are viewing this topic.

Offline Mutch

  • Novice
  • *
  • Posts: 36
    • View Profile
rm shocks
« on: February 22, 2009, 06:29:00 pm »
I have a set ot KYB shocks off a 1980 RM250.
I need to get them regased does anyone know what the correct pressure is.

               Cheers Mutch
Logged

Ji Gantor

  • Guest
Re: rm shocks
« Reply #1 on: February 22, 2009, 06:50:41 pm »
Hi Mutch,
I just checked my parts manual on the out side chance that the pressure was there but it was not.
Sorry.

Ji
Logged

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: rm shocks
« Reply #2 on: February 22, 2009, 07:55:41 pm »
yeah i do. will get the info to you as soon as i lay my hands on the book
« Last Edit: February 22, 2009, 07:58:35 pm by LWC3077 »
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Maico31

  • Guest
Re: rm shocks
« Reply #3 on: February 22, 2009, 07:59:23 pm »
Mutch between 10 or 13 bar should be ok. Ohlins recommend 13 for a pair of vintage shocks and a modern KYB shock is set at 10 bar so somewhere between that will work. 10 bar is 145lbs.
Logged

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: rm shocks
« Reply #4 on: February 22, 2009, 08:03:25 pm »
STD - 228PSI
MIN - 142PSI
MAX - 284PSI

OIL - 192CC of Belray LT100  (equivalent is Belray HVI 5W)
« Last Edit: February 22, 2009, 08:05:50 pm by LWC3077 »
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022
Pages: [1]   Go Up
« previous next »