Author Topic: 1975 Shock Rebuild Manual  (Read 4214 times)

0 Members and 1 Guest are viewing this topic.

Offline mposs

  • B-Grade
  • ***
  • Posts: 242
    • View Profile
1975 Shock Rebuild Manual
« on: February 01, 2008, 07:07:23 pm »
Was reading some old mags and came across a 32 page Shock Rebuild Manual that was included with the July 1975 edition of Modern Cycle. Included are articles on rebuilding Arnco, Betor, Boge, Honda, Curnutt, Koni, Redwing, Telesco and Thermal Phase shockers. Have attached a page from the koni section as an example. If the info in this manual is of interest to anyone I will try to post it up.

Cheers Mark

[attachment deleted by admin]

Offline PERM250

  • B-Grade
  • ***
  • Posts: 191
    • View Profile
Re: 1975 Shock Rebuild Manual
« Reply #1 on: February 03, 2008, 01:24:53 pm »
that would be great :) :) :)

bitserv

  • Guest
Re: 1975 Shock Rebuild Manual
« Reply #2 on: February 18, 2009, 02:58:46 pm »
If the info in this manual is of interest to anyone I will try to post it up.

Cheers Mark
Hi Mark, Did you post the article? I am just dismantling the Telseco's on my Cota and would appreciate any info you have.

Thanks

Steve

Offline mposs

  • B-Grade
  • ***
  • Posts: 242
    • View Profile
Re: 1975 Shock Rebuild Manual
« Reply #3 on: February 18, 2009, 06:07:53 pm »
Steve,
           Hope this helps.
                                     Cheers Mark

Offline mposs

  • B-Grade
  • ***
  • Posts: 242
    • View Profile
Re: 1975 Shock Rebuild Manual
« Reply #4 on: February 18, 2009, 06:09:10 pm »
Page 2 0f 2

Offline mposs

  • B-Grade
  • ***
  • Posts: 242
    • View Profile
Re: 1975 Shock Rebuild Manual
« Reply #5 on: February 18, 2009, 09:30:31 pm »
Thermal Phase....if any one is interested!

Offline mposs

  • B-Grade
  • ***
  • Posts: 242
    • View Profile
Re: 1975 Shock Rebuild Manual
« Reply #6 on: February 18, 2009, 09:36:50 pm »
Thermal   Page 2 of 2

Offline brent j

  • Legend
  • *****
  • Posts: 1435
  • Darwin, NT. Suzuki tragic, RL250M TS90MX PE250B
    • View Profile
Re: 1975 Shock Rebuild Manual
« Reply #7 on: February 18, 2009, 10:27:21 pm »
Any chance of getting a copy of the entire article?

I'm happy to pay any costs

Brent
The older I get, the faster I was

bitserv

  • Guest
Re: 1975 Shock Rebuild Manual
« Reply #8 on: February 20, 2009, 08:54:44 am »
Thanks for the copy of the pages

After doing some searches on the net I found out that the National Library appears to have a copy of the magazine, in fact they have issues all the way back to September '65. I have ordered a copy of the article through the online request system (cost $13.20) and as long as it is the correct magazine it will turn up in a week as a PDF. I will post it as soon as I get it.

Steve

bitserv

  • Guest
Re: 1975 Shock Rebuild Manual
« Reply #9 on: February 26, 2009, 09:53:32 am »
Unfortunately the National Library don't have this issue, so much for the accuracy of the online catalogue.

Steve