Bonehead ya bastard
I thought you had a YZ125J
but if ya just got a YZ125H all you need is 2 bearings 93317-22208, two nylon bushes 90386-22097 and two metal bushes 90380-16077 and the two oil seals that ya need are 93109-22018 which is 22mm-29mm-4mm.
I should've read you first posting about the H/J thing and that ya only have a H. But hey someone might need the part numbers
. and it wasnt raining so I needed to get out on 2 of my bikes and make sure they were running ok. I thought my YZ125J's powervalve wasnt working very well because I kept loosing the top end but it was just a blocked main jet. And my YZ125G hasnt been running well so I was just playing around with its jetting. I have slowly been building up info on YZ's and parts manuals so that when I get a problem I can maybe fix it.
By the way, in my YZ125G I didnt put in any nylon bushes but, I put in a second set of bearing and another set of oil seals. It has worked a treat. You YZ125H Is the same set-up so you could do the same if you wish.
Oh and after a while ya start to understand Yammie part numbers so it doesnt take to long to figure it all out.
Have a good holiday.
