anyone nead any casting made for old bikes

[80-85 husky]

i dont need one but there seems to be a demand for husky watercooler clutch covers 85 - 88. i did see a guy on cafe husky looking for a cover for the 84 125 (a 1 off) and they are RHP. maybe put up a note on cafe husky, its a ww site.

[bigk]

Reckon I have a clutch cover for '84 125.
K

[TTezza]

Hi KDX, how much work is it to make one of these without a master to work from, only the top cover needed not the seperate combustion chamber shown in the underneath shot

[Lozza]

Is that all one piece? Is there an o ring around the plug area if it's 2 piece?

[TTezza]

Lozza,
       2 pieces there, there is the combustion chamber (inside piece) that bolts to the top of the liner and then the outer cover bolts down over that to the outside of the barrel/water jacket. The spark plug hole is raised on the combustion chamber part and the outer cover has a hole that fits over/around it, and there is an 'O' ring between the two for the water seal, my TSS post has a few photos that might help.

[Lozza]

Cheers that offset squish has some bad detonation

[kdx 175]

TTeeza  send me sum photos it looks easy but you never know until i see it russellbrown13@bigpond my phone 0409145845

[80-85 husky]

off set detonation ....i thought Bultaco was spanish for blow up

[kdx 175]

80-85 husky i have the 84 huski WC 250 all most done just finishing the plastic cover in aluminum 

[80-85 husky]

excellent news. i will let one punter know who is busily trying to resurrect an old rotten one...he might be yr first customer