Ladies and Gents - due to some outside influences looks like my riding days may have come to a close. Fortunately/unfortunately the only bike I have left for sale is my Yamaha YZ360B.
Arguably one of the best looking, best set up and fastest YZBs in Australia. List of bits done to bike and spares is very extensive so will start here
Bike itself - matching numbers
- new/refurbished wheels, tyres, hubs both front and rear laced with HD stainless spokes.
- Race Tech emulators in the front forks with non OEM gaitors fitted to protect fork chrome
- Works performance shock - with race limiter as well for travel restriction
- new plastics/panels/fibreglass all around.
- refurbished and airbrushed fuel tank
- fresh top end in motor and bottom end all gear with gears etc overhauled
- front sprocket protector - as was required by MA - of the John Tate making so allows for easier spare parts sourcing and lighter pull
- all new levers and cables
- PVL system installed
- numerous bolts and bits & pieces either replaced, replated or cleaned etc.
- GMC works replica exhaust system - runs down right hand side, including GMC silencer as well.
As to spare parts:
- complete set of wheels - all ready to go - not new but originals redone for the bike.
- 2 spare shock absorbers - 1 x OEM with new standard HD spring, the other is a Reeder gas modified shockie which needs new seals
- complete set of spare body work with airbrushed tank done in US yellow and using an MX 400B tank.
- complete standard exhaust system - including OEM pickle and header pipe.
- several spare pistons and ring sets
- numerous clutch push lever assemblies
- spare brake hubs
- spare seat foam
- numerous cables, levers etc
- standard clutch pull assembly
- numerous other bits and pieces such as rear shock rubber covers, springs, OEM NOS bolts etc.
- VFORCE reed to fit
I am sure I have forgotten something and will go through the gear over the next few days to see if anything major but essentially all there with lost of spares - Ready to GO!!!!.
Not cheap - asking for $10K ONO + freight at buyers expense.
Bike is in Perth WA and I have a very reliable and decent price freight company can be used if needed.
Will try and get some photos up asap.
cheers
Rossco
