Author Topic: Honda 1984 XR250RE Brake Master Cylinder (Read 2685 times)

Stewart Allen · « **on:** November 11, 2015, 07:47:55 am »

Hi, Can anyone tell me what the bore size is on a XR250 front brake master cylinder ??

Stewart Allen · « **Reply #1 on:** November 17, 2015, 10:42:56 am »

Bumpty Bump Bump

the stig · « **Reply #2 on:** November 17, 2015, 12:38:18 pm »

Mine has a 7 stamped on it which usually means the size try a chines pit bike one for a 150..
I put one on a CR it fitted like a glove.

The Stig

crossedup2 · « **Reply #3 on:** November 17, 2015, 02:03:01 pm »

Stew

I think its 14mm. I have only ever had one apart too many years ago to be 100% sure.

OME Kit ===> http://www.ebay.com.au/itm/Genuine-Honda-XR250R-1984-1985-FRONT-Brake-Master-Cylinder-Rebuild-Kit-/141354061725

Honda Brake Master Cylinder Kit Fits: (FRONT)
TRX250R 1986, XL350R 1984-1986, XL600R 1983-1987, XL600V 1987-1990, XR250R 1984-1985, XR350R 1984-1985, XR500R 1983-1984, Set includes master cylinder piston, spring, seal, boot, and circlip.
OEM #45530-HB9-006

Peter B

the stig · « **Reply #4 on:** November 17, 2015, 08:15:14 pm »

Stew i have just had a look at the manual it says 12.700 with a service limit of 12.755 that's the 84 -85 service manual

The Stig

Stewart Allen · « **Reply #5 on:** November 17, 2015, 10:21:13 pm »

Hi All,
Thanks, just trying to buy one, going to try a Chinese one, but there are quite a few sizes. Now I know roughly what to look for thanks.

OzVMX Forum

Author Topic: Honda 1984 XR250RE Brake Master Cylinder (Read 2685 times)

Stewart Allen

Honda 1984 XR250RE Brake Master Cylinder

Stewart Allen

Re: Honda 1984 XR250RE Brake Master Cylinder

the stig

Re: Honda 1984 XR250RE Brake Master Cylinder

crossedup2

Re: Honda 1984 XR250RE Brake Master Cylinder

the stig

Re: Honda 1984 XR250RE Brake Master Cylinder

Stewart Allen

Re: Honda 1984 XR250RE Brake Master Cylinder