Author Topic: TY 250ABCD / 175BCD Front Backing plate  (Read 3479 times)

0 Members and 1 Guest are viewing this topic.

Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
TY 250ABCD / 175BCD Front Backing plate
« on: January 30, 2015, 08:39:56 am »
Has Speedo drive slot which I intend to use.  The old one has totally disintegrated.

I still have all the speedo workings, so the plate by itself is OK.

Thanks in advance for any help.
« Last Edit: January 30, 2015, 01:26:08 pm by YZ250H »
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
The only triple jumps he would have been doing are the hop, skip & jump.

Offline tony27

  • Legend
  • *****
  • Posts: 1908
    • View Profile
Re: TY 250A Front Backing plate
« Reply #1 on: January 30, 2015, 09:00:06 am »
Pretty certain they didn't change over the different models, 175 are the same

Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
Re: TY 250A Front Backing plate
« Reply #2 on: January 30, 2015, 11:55:40 am »
Thanks Tony,

That gives me a few more options
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
The only triple jumps he would have been doing are the hop, skip & jump.

Simo63

  • Guest
Re: TY 250A Front Backing plate
« Reply #3 on: January 30, 2015, 12:30:39 pm »
Would a DT one fit?

Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
Re: TY 250ABCD / 175BCD Front Backing plate
« Reply #4 on: January 30, 2015, 01:14:13 pm »
Not sure Simo. 

Part number is 434-25121-02-00.  DT250 A is different part number.
TY 175B and 250B is 434-25121-02-00 also as Tony said.
So is 175C and 250C
So is 175D and 250D

NWVCP seem to lose interest in TY's after that  :o :o
« Last Edit: January 30, 2015, 01:25:36 pm by YZ250H »
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
The only triple jumps he would have been doing are the hop, skip & jump.

Offline Davey Crocket

  • Legend
  • *****
  • Posts: 4408
    • View Profile
Re: TY 250ABCD / 175BCD Front Backing plate
« Reply #5 on: January 30, 2015, 01:36:49 pm »
I'll have one for sure......have 4 TY175's to wreck.
QVMX.....Australia's #1 VMX club......leading the way.

Offline David Lahey

  • Legend
  • *****
  • Posts: 956
  • Gladstone, Queensland Australia
    • View Profile
Re: TY 250ABCD / 175BCD Front Backing plate
« Reply #6 on: January 30, 2015, 03:23:06 pm »
Even the TY175JC backing plate will fit, and is the same as the TY250A apart from a hole they have to allow the thickness of the brake lining material to be inspected without pulling the wheel out.
previous pseudonym feetupfun

Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
Re: TY 250ABCD / 175BCD Front Backing plate
« Reply #7 on: January 30, 2015, 04:22:08 pm »
I'll have one for sure......have 4 TY175's to wreck.

Pick out a nice one for me John  ;)

Let me check what else I need too.  I migh have a list of things  :o
« Last Edit: January 30, 2015, 04:33:10 pm by YZ250H »
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
The only triple jumps he would have been doing are the hop, skip & jump.

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: TY 250ABCD / 175BCD Front Backing plate
« Reply #8 on: February 02, 2015, 03:52:52 pm »
do you have any front or rear guards for me ? air filter i can wash ...... rear wheel.  what else do i need
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline Davey Crocket

  • Legend
  • *****
  • Posts: 4408
    • View Profile
Re: TY 250ABCD / 175BCD Front Backing plate
« Reply #9 on: February 02, 2015, 05:12:44 pm »
New guards are cheap out of the UK Freaky, Yamaha still sell new air filters, I'll have a rear wheel.....send me your lists Fellas.
QVMX.....Australia's #1 VMX club......leading the way.

Offline David Lahey

  • Legend
  • *****
  • Posts: 956
  • Gladstone, Queensland Australia
    • View Profile
Re: TY 250ABCD / 175BCD Front Backing plate
« Reply #10 on: February 02, 2015, 07:55:26 pm »
New guards are cheap out of the UK Freaky, Yamaha still sell new air filters, I'll have a rear wheel.....send me your lists Fellas.
There are a few brands of aftermarket air filters for them available, and all are longer-lasting than the genuine Yamaha filter
DC plastics make semi-replica plastic guards that are very light and look almost right and you can also get very good plastic replica rear guards

This rear guard for TY250 is made to fit all twinshock model TY250s. For A and B models you cut the front off it
http://www.inmotiontrials.com/product/ty-250-rear-mudguard-white/

http://www.tytrials.co.uk/trailandtrialsuk/prod_2772469-14-Air-Filter-TY250-Twinshock.html
« Last Edit: February 02, 2015, 07:59:24 pm by feetupfun »
previous pseudonym feetupfun

Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
Re: TY 250ABCD / 175BCD Front Backing plate
« Reply #11 on: February 05, 2015, 09:55:00 am »
List PM'd to you John  8)
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
The only triple jumps he would have been doing are the hop, skip & jump.