Author Topic: 85 XR250 frame, swingarm, rear wheel, etc.  (Read 2196 times)

0 Members and 1 Guest are viewing this topic.

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
85 XR250 frame, swingarm, rear wheel, etc.
« on: October 23, 2014, 07:40:48 pm »
Frame in good condition. Dent free lower rails. Has compliance plate, dated late 84.
Swingarm in good nick. No play in bearings.
Tank has been very roughly sanded back, should clean up fine. Inc cap and tap.
side stand.
Rear wheel, has one big corrosion patch on rim. Some cosmetic rust on some spokes. Wheel otherwise seems goof. Tyre very sad (about 15% tread left). Good bearings, 35T sprocket, brake plate included.
Brake pedal straight.
LHS footpeg.
Original handlebars, slightly tweaked but could be straightened for a resto bike.
Triple clamps in VGC.

$80/lot? Will seperate.

Currently located in Canberra, will be in Yass early next week.

Photos later.
The good thing about telling the truth is that you don't have to remember what you said.

Offline DIRTPILOT72

  • A-Grade
  • ****
  • Posts: 310
    • View Profile
Re: 85 XR250 frame, swingarm, rear wheel, etc.
« Reply #1 on: October 25, 2014, 12:38:10 pm »
Intersted in the frame and sidestand.
Honda XR200 x2
Honda XR250
Yamaha Yamahopper QT50

Offline shelpi

  • Legend
  • *****
  • Posts: 2056
    • View Profile
Re: 85 XR250 frame, swingarm, rear wheel, etc.
« Reply #2 on: October 25, 2014, 01:06:21 pm »
has it got the front brake assembly? master and caliper ;)

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
Re: 85 XR250 frame, swingarm, rear wheel, etc.
« Reply #3 on: October 25, 2014, 07:21:07 pm »
has it got the front brake assembly? master and caliper ;)

Nope - I bought it for the forks/wheel/front brake.

DP, PM replied.
The good thing about telling the truth is that you don't have to remember what you said.

Offline Fenno

  • C-Grade
  • **
  • Posts: 124
    • View Profile
Re: 85 XR250 frame, swingarm, rear wheel, etc.
« Reply #4 on: October 26, 2014, 09:25:43 pm »
i got a master and caliper


CR480rd
CR250rd
plus years of collecting 83 Cr junk

Offline shelpi

  • Legend
  • *****
  • Posts: 2056
    • View Profile
Re: 85 XR250 frame, swingarm, rear wheel, etc.
« Reply #5 on: October 27, 2014, 10:41:37 am »
i got a master and caliper

yep interested, cheers

Offline Fenno

  • C-Grade
  • **
  • Posts: 124
    • View Profile
Re: 85 XR250 frame, swingarm, rear wheel, etc.
« Reply #6 on: October 27, 2014, 11:46:21 am »
PM sent shelpi

Nath what are you building ?
Thought you were all green
CR480rd
CR250rd
plus years of collecting 83 Cr junk

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
Re: 85 XR250 frame, swingarm, rear wheel, etc.
« Reply #7 on: October 27, 2014, 03:48:15 pm »
Nah, I'm a bike tart.
This is about making the 83 RM125 stop. Hoping like hell that I can get at least 11" of travel out of the XR forks...
The good thing about telling the truth is that you don't have to remember what you said.

Offline SimonC

  • B-Grade
  • ***
  • Posts: 201
    • View Profile
Re: 85 XR250 frame, swingarm, rear wheel, etc.
« Reply #8 on: October 27, 2014, 05:31:11 pm »
I have an 85 seat if anybody needs one.