Got the following parts from an early XL250, engine no is SL250E-.
Barrel, on 74.75mm bore, bit broken off outside but will work ok.
Cyl head, looks good where the cam runs, still has valves in.
Cam, looks good.
Complete gearbox shafts with gears, all gears appear ok.
Crank, bearings look good, big-end feels ok.
Magneto flywheel.
Clutch.
Kick start shaft, splines good.
Cam rockers, look ok.
Plus other engine bits.
Pick-up only (coz it would be a headache to package), Wallan, Vic.
