Author Topic: Honda CR engine cases  (Read 1926 times)

0 Members and 1 Guest are viewing this topic.

Offline 35elsinore

  • B-Grade
  • ***
  • Posts: 269
    • View Profile
Honda CR engine cases
« on: August 31, 2014, 09:30:52 pm »
Looking for a good set of Honda 73/74 cr250 engine cases and 75 cr125 engine cases.

Cheers Troy

Offline SimonC

  • B-Grade
  • ***
  • Posts: 201
    • View Profile
Re: Honda CR engine cases
« Reply #1 on: August 31, 2014, 10:03:04 pm »
I have a set of 75 250 cases if they are of any use.

Offline 35elsinore

  • B-Grade
  • ***
  • Posts: 269
    • View Profile
Re: Honda CR engine cases
« Reply #2 on: September 01, 2014, 08:07:19 am »
I want to build up a spare engine for my 74 cr, I have a couple sets of case but they are not real flash. Sadly the 75 cr250 are different.
Thanks anyway Simon, someone else might be interested in them
Cheers Troy

Offline bigk

  • Legend
  • *****
  • Posts: 2655
  • Kangaroo Flat Victoria
    • View Profile
Re: Honda CR engine cases
« Reply #3 on: September 01, 2014, 01:56:27 pm »
How good do you want? I will have both 250 & 125 cases but none will be perfect. I also have a couple of MT250 bottom ends, the wide ratio trans works well in CR250's.
Cheers,
K

Offline 35elsinore

  • B-Grade
  • ***
  • Posts: 269
    • View Profile
Re: Honda CR engine cases
« Reply #4 on: September 01, 2014, 11:16:30 pm »
Hey BigK, they don't have to be perfect, just aslong as they don't need welding up. I have a few mt bottom ends but are after cr.

Cheers Troy

Offline OverTheHill

  • Legend
  • *****
  • Posts: 801
    • View Profile
Re: Honda CR engine cases
« Reply #5 on: September 02, 2014, 09:52:23 am »
Have a new stator plate if needed [in nz]--not cheap though, well, not yet anyway. On trademe but might not have re-listed yet, loosing track of my listings [geriatric lol].

Offline 35elsinore

  • B-Grade
  • ***
  • Posts: 269
    • View Profile
Re: Honda CR engine cases
« Reply #6 on: September 02, 2014, 08:46:04 pm »
I have everything but good cases.
Would consider bottom ends or complete unknown engines if cases look good extenally


 Cheers
Troy
« Last Edit: September 02, 2014, 08:52:01 pm by 35elsinore »