« previous next »
Pages: [1]   Go Down

Author Topic: Husky Honda  (Read 3501 times)

0 Members and 1 Guest are viewing this topic.

firko

  • Guest
Husky Honda
« on: July 22, 2008, 11:06:49 am »
I got a phonecall this morning from a mate who has picked up somebodies long abandoned Honda XL500s powered 1983 Husky basketcase. The bike apparently started life as a 1983 XC250. My mate was wondering if this conversion has been done before and if so, if anybody has any tips or photos of the conversion they'd like to pass on or share? 
Logged

Tony T

  • Guest
Re: Husky Honda
« Reply #1 on: July 22, 2008, 08:56:44 pm »
Pardon my stupidity, but weren't the early Curtis bikes essentially Husky's with Honda engines?
Logged

Offline crossedup2

  • B-Grade
  • ***
  • Posts: 249
  • Never enough shed time.....
    • View Profile
Re: Husky Honda
« Reply #2 on: July 22, 2008, 09:50:14 pm »
Firko

A friend of mine put a XL500 motor into an early Husky frame about 15 years ago. I seem to remember that the frame was a '77 125. The work involved a lot of squeezing and a few cuts with the red knife.

I think the bike is still at Parkes and have always meant to chase it up. I never saw it going but I was told it was a monster in all but a straight line!

I'll have to follow that one up.

Peter
Logged
Anything Yamaha. AT1, CT1 (X3), RT1, DT3 (x3), YZ125X,  YZ250E, YZ400D, IT175E, IT250H, XR500RC . Always looking for Pre 78 Yamaha stuff....

Offline YUMASTEPSIDE

  • Legend
  • *****
  • Posts: 802
    • View Profile
Re: Husky Honda
« Reply #3 on: July 23, 2008, 07:30:53 am »
I think I've seen that Honda/Husky from Parkes,if its the one I'm thinking of ,its been stripped out !I'll see what I can find out.

                          Roger
Logged

Offline bigk

  • Legend
  • *****
  • Posts: 2655
  • Kangaroo Flat Victoria
    • View Profile
Re: Husky Honda
« Reply #4 on: July 23, 2008, 11:13:01 pm »
I think I bought the forks, shocks, wheels and seat from the Parkes bike. They were on ebay a couple of months ago and came from Parkes. The description said it was a CR125 Husky that had a four stroke conversion. The forks have the steering head section of the frame attached, cut just behind it, so the frame would be scrap.
Cheers,
K
Logged

Offline YUMASTEPSIDE

  • Legend
  • *****
  • Posts: 802
    • View Profile
Re: Husky Honda
« Reply #5 on: July 24, 2008, 12:18:41 pm »
Yeah,it was a CR125 Husky with an XL then an XR 500 motor in it,the bloke also made it into a trike and then it was sold and stripped out. I think a mate of mine still has the trike rear end and Husky rear frame.

                       Roger
Logged

firko

  • Guest
Re: Husky Honda
« Reply #6 on: July 26, 2008, 04:04:04 pm »
There's been a lot of Honda engines fitted to everything from the old MJ frames right up to the bike you guys are tlking about. This is a white framed '83 model which I've been told has a smaller frame cradle.
Logged

Offline Moto

  • A-Grade
  • ****
  • Posts: 326
    • View Profile
Re: Husky Honda
« Reply #7 on: July 26, 2008, 06:49:31 pm »
I have a spare Husky MK frame,swing arm and steering head if anyone wants it for a project.
Logged

Offline YUMASTEPSIDE

  • Legend
  • *****
  • Posts: 802
    • View Profile
Re: Husky Honda
« Reply #8 on: July 27, 2008, 08:56:00 am »
Details ?..........$$$ ????
Logged

tommorth

  • Guest
Re: Husky Honda
« Reply #9 on: July 27, 2008, 05:11:36 pm »
ive got a vmx mag some where with an article on husky honda hybrids somewhere
 its got a honda cr250 with fox shox on the cover
Logged

Offline maicoman18

  • B-Grade
  • ***
  • Posts: 186
    • View Profile
Re: Husky Honda
« Reply #10 on: July 31, 2008, 09:05:39 pm »
Moto, has anyone taken the frame off your hands yet??
Logged
Pages: [1]   Go Up
« previous next »