gearbox bearings

[Ktm181]

Hi guys,
still chasing 09264-20002 RM465/500 gearbox bearing and 09380-28004 gearbox circlip, tried just about everywhere, anyone got any unusual sources, or have any you no longer need? both sit on the same shaft as the countershaft sprocket but on the opposite end to sprocket if that makes sense? (driven shaft)

cheers,
Kt

[Ktm181]

Hi guys,
still chasing 09264-20002 RM465/500 gearbox bearing and 09380-28004 gearbox circlip, tried just about everywhere, anyone got any unusual sources, or have any you no longer need? both sit on the same shaft as the countershaft sprocket but on the opposite end to sprocket if that makes sense? (driven shaft)

cheers,
Kt

bump

[shelpi]

have you tried Paul Miller? inda USA

[Ktm181]

have you tried Paul Miller? inda USA

No mate, do you have a link or email address? 

Kt.

[crs-and-rms]

email is [email protected] ive bought lots of parts from them

[Ktm181]

email is [email protected] ive bought lots of parts from them

I tried them a while back, even though they "advertise" that they supply a full set of gearbox/bottom end bearings their reply was that "we cannot supply THAT bearing,it is Suzuki only", not sure if anyone has used their RM465/500 gearbox bearing sets and could confirm what they were actually supplied though?

Kt

[suzuki27]

Have you tried Crooks in the UK?

[shelpi]

yep been down that road, but with the T250 even had the correct p/n but wrong bearing, used old bearing as it was in great shape and change oil after every race meeting, so if you source the right size it can be machined for the clip, good luck as I went to all the bearing manufacturers and came back with suzuki only, now buying all and any engines for spares

[shelpi]

Have you tried Crooks in the UK?

just keep trying it is amazeing whats comeing on line 1 by 1

[Ktm181]

Have you tried Crooks in the UK?

Thanks Suzuki27, YES, emailed them this morning thanks to YOU!!!

kT

[Ktm181]

Have you tried Crooks in the UK?

just keep trying it is amazeing whats comeing on line 1 by 1

thanks SHELPI, been trying everywhere for last 3 mths!  The world over no less!

kT

[Ktm181]

email is [email protected] ive bought lots of parts from them

Thanks mate, i am trying them again, they say can supply full set so surely MUST be able to supply a one off bearing from the set, people like McMasters reckon they must be specially made for Vintage Suzuki OR they are NOT supplying a full set. Hell, i dont care if i have to buy a full set if it is in fact a FULL SET!

Kt.

[shelpi]

Have you tried Crooks in the UK?

just keep trying it is amazeing whats comeing on line 1 by 1

thanks SHELPI, been trying everywhere for last 3 mths!  The world over no less!

kT

yep I know your pain Im 18 months down the track on this, I still poke people from time to time, but now have back up and spares of used