« previous next »
Pages: [1]   Go Down

Author Topic: Honda XR250 balance Shafts  (Read 1181 times)

0 Members and 1 Guest are viewing this topic.

Offline Stewart Allen

  • A-Grade
  • ****
  • Posts: 404
    • View Profile
Honda XR250 balance Shafts
« on: November 13, 2013, 08:28:18 pm »
So what's the opinion of the balance shafts in the XR250's, is it best to remove them & have the crank re balanced ? Will it improve the performance/throttle response much ? Anyone done it ?
Logged
CHEERS STEWART

Doing it to old things is fun
# 74 Heaven
IT490 Will be going one day soon
CR125M
SL175 bitza
IT250D needs work
CR250RE Not going as yet
YZ125F

Offline mustanggrahame

  • A-Grade
  • ****
  • Posts: 373
    • View Profile
Re: Honda XR250 balance Shafts
« Reply #1 on: November 13, 2013, 08:42:44 pm »
The best thing to improve the performance of your XR250 is to walk straight past it and hop on your CR250RE.
Grahame
Logged
RT1, DT1F, MX100A, TY80A, YZ80D, DT125E, CR125RE, 1982 KTM125RV, 1985 Can Am ASE, 1989 YZ250WR, 1991 YZ250WR

Offline crossedup2

  • B-Grade
  • ***
  • Posts: 249
  • Never enough shed time.....
    • View Profile
Re: Honda XR250 balance Shafts
« Reply #2 on: November 13, 2013, 11:02:44 pm »
Stewart
Leave the balance shaft in.

I've heard many stories, mainly 500 and 600 letting go after they have had the balancers removed. The idea of riding an XR is to be reliable and work with what you can not leave bits out hope you finish!

Find a cam and HC piston, mikuni carb and hang on!!!

Peter B
Logged
Anything Yamaha. AT1, CT1 (X3), RT1, DT3 (x3), YZ125X,  YZ250E, YZ400D, IT175E, IT250H, XR500RC . Always looking for Pre 78 Yamaha stuff....
Pages: [1]   Go Up
« previous next »