Author Topic: Marzocchi Front Fork Parts  (Read 2020 times)

0 Members and 1 Guest are viewing this topic.

Offline oz555ktm

  • Legend
  • *****
  • Posts: 2168
    • View Profile
Marzocchi Front Fork Parts
« on: September 13, 2013, 09:46:25 pm »

   Can any one tell me where I can get some Bushes for  Marzocchi front forks..

   Slider and Leg bushes for 41.7 and 40

   Slider bushes fit to the botom of the Slider ..

    Leg bushes fit just below the seals .

  Off a KTM 1982 to 1984  Normal forks
And Please forgive me as I cant Spell for Shit ...
And I have very Bad Gramer ...too I been told ......

Offline b490

  • Legend
  • *****
  • Posts: 541
    • View Profile
Re: Marzocchi Front Fork Parts
« Reply #1 on: September 13, 2013, 11:09:49 pm »
 Hey Dennis  ,
  3rd item down on list .....  is this what you looking for ??

http://www.enduroklassiker.at/artikel/index.php?mid=99&cat=2&sort=

Regards ,
                 Steve
« Last Edit: September 13, 2013, 11:20:00 pm by b490 »

Offline oz555ktm

  • Legend
  • *****
  • Posts: 2168
    • View Profile
Re: Marzocchi Front Fork Parts
« Reply #2 on: September 21, 2013, 10:18:40 pm »

  still in Need of Fork Bushes

     Top Bushes in leg Both 40mm and 41.7
And Please forgive me as I cant Spell for Shit ...
And I have very Bad Gramer ...too I been told ......

Offline Slakewell

  • Legend
  • *****
  • Posts: 3577
  • Slakewell Motordrome
    • View Profile
Re: Marzocchi Front Fork Parts
« Reply #3 on: September 22, 2013, 07:46:42 am »
You can buy bronze bush that close to size at the bearing center and then machine to correct size. You may need to ream the last bit. 
Current bikes. KTM MC 250 77 Husky CR 360 77, Husky 82 420 Auto Bitsa XR 200 project. Dont need a pickle just need to ride my motorcickle

Offline Eldert

  • Novice
  • *
  • Posts: 22
    • View Profile
Re: Marzocchi Front Fork Parts
« Reply #4 on: September 29, 2013, 04:56:35 pm »
you can forget about Marzocchi bushings .

i had a friend who had the same problem with his 40 mm KTM forks

i did a little searching on Google and found that a few Yamaha road bikes had 40 mm Kayaba
forks with upper bushings in the fork slider ( V Max and a few others )
i never ordered some at the dealer so i could not compare dimensions .

the Yamaha part number is 3JJ-23125-00 . you might have to machine the slider to accept the Kayaba bushing .
 
if you go this route please let us know how it did work out

Eldert

Offline oz555ktm

  • Legend
  • *****
  • Posts: 2168
    • View Profile
Re: Marzocchi Front Fork Parts
« Reply #5 on: October 04, 2013, 08:00:25 pm »

   Thanks  Eldert

    Dennis
And Please forgive me as I cant Spell for Shit ...
And I have very Bad Gramer ...too I been told ......