Pistons and rod kits for cr250 rz?

[09.0]

After a supplier for rod kits and piston kits for the cr250rz's.

[Tahitian_Red]

Wiseco still offers the piston kits, but I think you may have to use a later model rod and have the crank machined for it.

[Snowy 76]

Dont know about mechining but prox list same rod from 78 to 01 part # 03.1315

[bigk]

Both Wiseco & ProX rod kits are available, however the pin is too long and needs to be ground to the correct length. The trick is to use Wiseco #8160 rod kit listed for ATC250 2T, the pin is a couple of mm shorter than std but you don't have to root around shortening the other one. Pistons are easy, but be careful if you still have the standard chrome bore, as they require different rings.
K

[09.0]

Thanks for the replies. More than helpful

[smed]

I got one off these guys for my 79 ,they also do Maico ones & others,piston kit's & all sorts of gear well worth a browse

 http://www.ebay.com.au/itm/MITAKA-Connecting-Rod-Kit-CR250-CR-250-1978-1979-/230755690490?pt=UK_Motorcycle_Parts&hash=item35ba1c67fa#ht_1451wt_1163

[popeye]

Sorry Brad l didnt see the post, l just put a rod kit and piston kit in mine and they both came from Serco, give Allan Holleoak a call..

Wiesco piston  and a hot rods rod kit.... about $380 from memory..

[09.0]

Cheers Popeye. (toot toot).