« previous next »
Pages: [1]   Go Down

Author Topic: RM125B/C/N/T roller, or frame or whatever. Or maybe PE175 of similar age?  (Read 488 times)

0 Members and 1 Guest are viewing this topic.

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
RM125B/C/N/T roller, or frame or whatever. Or maybe PE175 of similar age?
« on: April 13, 2012, 05:23:43 pm »
Posted this earlier, seemed to disappear?!

Anyhow, looking for a starting point for a FrankenBike with an air-cooled RM80 motor - basically going to be an 80cc Vinduro bike - so any of the bigger bikes are going to be too big/heavy (thanks anyhow Dan).

At a minimum, I'd need frame, triple clamps, swingarm, airbox and rear brake pedal - bt a complete roller would be better.

Let me know what you've got.

Nathan.
04000 23847

Logged
The good thing about telling the truth is that you don't have to remember what you said.

Offline John Orchard

  • Legend
  • *****
  • Posts: 3065
  • ^^^ July 1984
    • View Profile
Re: RM125B/C/N/T roller, or frame or whatever. Or maybe PE175 of similar age?
« Reply #1 on: April 13, 2012, 06:15:03 pm »
I got ...

RM125B bare frame with stock swingarm.
PE175N triple clamps
PE175N forks
PE175N front wheel (with welded crack in rim)

The PE front end was fitted to the frame when I scored it, it works ok.

$100 for the lot if you're interested.
Logged
Johnny O - Tahition_Red factory rider.
Pages: [1]   Go Up
« previous next »