Author Topic: 73-4 elsinore pipe query.  (Read 1394 times)

0 Members and 1 Guest are viewing this topic.

Offline suzuki447

  • A-Grade
  • ****
  • Posts: 304
    • View Profile
73-4 elsinore pipe query.
« on: January 05, 2012, 10:00:20 pm »
hi did the 73-4 elsinore 125 and 250 have fixed silencers or just a long stinger pipe with muffler slid over it.thanks don
bikes in shed.74tm125,76,78,82rm125s,...82,83rm250s.80canam qualifier.80,83yz125s.86yz490.80it125.76it400.80pe175and250.79rm50.76xr75.2xpuch50 magnums.jawa speedway.72honcho 90.84xr200.87xr100.phew thats all.

Offline jimg1au

  • Legend
  • *****
  • Posts: 3489
    • View Profile
Re: 73-4 elsinore pipe query.
« Reply #1 on: January 05, 2012, 10:02:39 pm »
just a long stinger pipe with muffler slid over it
jim

Offline suzuki447

  • A-Grade
  • ****
  • Posts: 304
    • View Profile
Re: 73-4 elsinore pipe query.
« Reply #2 on: January 05, 2012, 10:11:54 pm »
thanks jim i think i have two nos elsinore pipes one -125 one -250 they look like the original one but no muffler with them .i bought them thinking they were tm 125-250 pipes but exhaust flange is on opposite side .
bikes in shed.74tm125,76,78,82rm125s,...82,83rm250s.80canam qualifier.80,83yz125s.86yz490.80it125.76it400.80pe175and250.79rm50.76xr75.2xpuch50 magnums.jawa speedway.72honcho 90.84xr200.87xr100.phew thats all.

Offline jimg1au

  • Legend
  • *****
  • Posts: 3489
    • View Profile
Re: 73-4 elsinore pipe query.
« Reply #3 on: January 05, 2012, 10:16:32 pm »
what are you going to do with the 250 on
send me some pics and i will confirm cr250m
after market cr250 pipes are all 1 peice not like original
jim
« Last Edit: January 05, 2012, 10:22:24 pm by jimg1au »

Offline suzuki447

  • A-Grade
  • ****
  • Posts: 304
    • View Profile
Re: 73-4 elsinore pipe query.
« Reply #4 on: January 05, 2012, 10:48:20 pm »
thanks jim ,not sure what i,m doing with pipes as yet wanted to build a flatracker of somesought.and fit pipe to that.will send photos asap thanks.i,m the bloke helping to get surfair and the hogg started again ,track nearly done .and vintage mx track there too.
bikes in shed.74tm125,76,78,82rm125s,...82,83rm250s.80canam qualifier.80,83yz125s.86yz490.80it125.76it400.80pe175and250.79rm50.76xr75.2xpuch50 magnums.jawa speedway.72honcho 90.84xr200.87xr100.phew thats all.

Offline jimg1au

  • Legend
  • *****
  • Posts: 3489
    • View Profile
Re: 73-4 elsinore pipe query.
« Reply #5 on: January 05, 2012, 10:50:45 pm »
 i have a gen pre 75 flat track roller that will take any side port 2t motor.will be forsale soon
jim

Offline pancho

  • Legend
  • *****
  • Posts: 2375
    • View Profile
Re: 73-4 elsinore pipe query.
« Reply #6 on: January 06, 2012, 03:39:02 pm »
 Good to read about so many flat trackers up and coming!
 pancho
dont follow me i'm probably off line!