« previous next »
Pages: [1]   Go Down

Author Topic: DT-1/RT-1 Fork Braces  (Read 1252 times)

0 Members and 1 Guest are viewing this topic.

Offline Tahitian_Red

  • Legend
  • *****
  • Posts: 1109
  • Mugen ME480
    • View Profile
DT-1/RT-1 Fork Braces
« on: July 02, 2012, 01:15:55 pm »
Are the fork braces used on old Yamahas more for show than function?  Surely most of the flex comes from the spindly 34mm fork tubes and not the sliders. 

By tying the sliders together for increased rigidity wouldn't that put more pressure on the fork tubes?  Do the 34mm tubes usually bend side to side or front to back?

 ???
Logged
The "Factory Novice"
California, USA

'74 Suzuki TM100, '75 Bultaco 250 Pursang, '77 Honda XR75, '77 Suzuki RM125B, '77 Yamaha YZ400D, '79 Honda CR250RZ Moto-X Fox Replica, '83 Honda ME480RD Mugen

Offline firko

  • Superstar
  • ******
  • Posts: 6578
    • View Profile
Re: DT-1/RT-1 Fork Braces
« Reply #1 on: July 02, 2012, 01:47:18 pm »
I'm pretty sure the Webco/Circle Industries style fork braces don't make all that much difference but because the forks are basically fairly ordinary it can't hurt to have them. From my experience I don't think the 34mm forks flex all that more than the Euro 35mm items, the problem with them is more about poor dampening than flex which, seeing you've got emulators fitted, should now be a non issue.

 I've got fork braces on my bikes purely for the early seventies vibe they bring ;D.
Logged
'68 Yamaha DT1 enduro, '69 Yamaha 'DT1 from Hell' '69 DT1'Dunger from Hell, '69 Cheney Yamaha 360, 70 Maico 350 (2 off), '68 Hindall Ducati 250, Hindall RT2MX, Hindall YZ250a , Cycle Factory RT2MX flat tracker, Yamaha 1T250J, Maico 250 trials, '71, Boyd and Stellings TM400, Shell OW72,750 Yamaha

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: DT-1/RT-1 Fork Braces
« Reply #2 on: July 02, 2012, 02:37:30 pm »
they move front to back.  I turn around my YZA forks and other 34mm Yams  90 degrees every so often, cause every 5- 10 races you can see they have started to slightly curve between the lower triple and the fork boot
Logged
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Doggy Digger

  • Guest
Re: DT-1/RT-1 Fork Braces
« Reply #3 on: July 02, 2012, 06:38:25 pm »
How many rotations do you reckon; before they snap off! :)
Logged
Pages: [1]   Go Up
« previous next »