« previous next »
Pages: [1]   Go Down

Author Topic: 1987 xc 430  (Read 2597 times)

0 Members and 1 Guest are viewing this topic.

Offline DJVGXL

  • C-Grade
  • **
  • Posts: 62
    • View Profile
1987 xc 430
« on: October 11, 2011, 09:15:31 pm »
Just a quick question for a mate with a 87 xc 430. Is there high level oil screw like on jap bikes when filling gear box? If there isn't how much oil do these boxes hold? Any help would be great,thanks in advance.

David
Logged

Offline sverige

  • C-Grade
  • **
  • Posts: 50
  • Sunshine Coast
    • View Profile
Re: 1987 xc 430
« Reply #1 on: October 12, 2011, 10:54:45 pm »
1987 technical data service bulletin for 430 xc

oil capacity in gearbox   1.4 L    or    0.37 US gal

engine oil   sae 20


cheers
Logged

Offline DJVGXL

  • C-Grade
  • **
  • Posts: 62
    • View Profile
Re: 1987 xc 430
« Reply #2 on: October 13, 2011, 06:53:26 pm »
thanks sverige
Logged

Offline Mike52

  • Legend
  • *****
  • Posts: 1834
  • 81 KTM 125 LC
    • View Profile
Re: 1987 xc 430
« Reply #3 on: October 14, 2011, 05:33:15 pm »
Quote from: sverige on October 12, 2011, 10:54:45 pm
oil capacity in gearbox   1.4 L    or    0.37 US gal
engine oil  sae 20

cheers

Normally ST20 or Belray 85 wt.
The ST20 you can't get .
Closest is SAE 30 which is available from Bunnings and Supercheep and is for Briggs n Stratton mowers.
Penrite is the name.
Black bottle.
Buy the 2 litre one from Supercheep cause it's cheeper.
Note* ST is the old straight oils that I remember as a kid.
« Last Edit: October 18, 2011, 10:16:07 am by Mike52 »
Logged
85/400WR,86/240WR,72/DKW125,Pe250c,TC90,TS100,XT250,86/SRX250,XR400r
Friend  struggling up a hill on a old bike at MTMee .http://www.youtube.com/watch?v=cjj6E2MP9xU.

Offline sverige

  • C-Grade
  • **
  • Posts: 50
  • Sunshine Coast
    • View Profile
Re: 1987 xc 430
« Reply #4 on: October 14, 2011, 09:54:38 pm »
Yes good point Mike,  re- SAE 20 oil.

Sorry David,   I was reading straight off the the spec sheet.

I took my 430 WR to a two day trail ride a couple of weekends ago and I tried  (for the first time ) the Penrite Monograde SAE 30 oil in the gearbox.

Well the bike ran fantastic, shifted perfectly and even on the Sunday morning cold start, no problems. I drained the oil out when I got home and apart from a very slight purple tinge, the oil looked good. Happy with the results, I put some more SAE 30 back in.

cheers
« Last Edit: October 14, 2011, 10:05:27 pm by sverige »
Logged
Pages: [1]   Go Up
« previous next »