« previous next »
Pages: [1]   Go Down

Author Topic: Cr125 shock seals  (Read 1256 times)

0 Members and 1 Guest are viewing this topic.

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Cr125 shock seals
« on: August 05, 2011, 02:23:28 pm »
Can anyone point me in the direction of seals for the rear shocks on a 125 CR 74 ???   are the 250 seals the same ????

Anyway where do they come from, what else fits or where are the cheapest ones.
Logged
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Cr125 shock seals
« Reply #1 on: August 05, 2011, 04:03:41 pm »
There are 10 and 12mm shafts. I have only personally seen 10mm though. The 10mm seals are 10 x 25 x 9.5 and the body o-ring is 30.8 x 1.9. Other parts should be inspected and replaced if necessary too. Those sizes are from specs for CR250M but i think the ones i have got are 125 and use the same 10mm seals too.
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: Cr125 shock seals
« Reply #2 on: August 05, 2011, 04:53:54 pm »
OK and where the cheapest place for these seal ?? can you get them from SKF  shop ????
Logged
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: Cr125 shock seals
« Reply #3 on: August 05, 2011, 04:55:57 pm »
is the 9.5 the ID or the width ?
Logged
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Cr125 shock seals
« Reply #4 on: August 05, 2011, 05:47:56 pm »
Yes 9.5 is the thickness/height. OEM Honda part number is 91256-300-970 Im not sure if they are available new still. Otherwise yeah just try a SKF bearing dealer. You can get a head start and find the SKF number off their site. Its a little tricky to follow though, but if you can wait i will try and find it on the SKF site on the weekend, or just try Hoeys or one of the Elsinore parts specialists on the web.
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline dkupf

  • A-Grade
  • ****
  • Posts: 373
  • Kinka Beach Qld
    • View Profile
Re: Cr125 shock seals
« Reply #5 on: August 05, 2011, 06:29:21 pm »
« Last Edit: August 05, 2011, 06:31:19 pm by dkupf »
Logged
I might not be winning,But I'll be grinning
Pages: [1]   Go Up
« previous next »