OzVMX Forum
The forum for fans of old dirtbikes
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Login
Register
OzVMX Forum
»
Marque Remarks
»
CZ
»
Need help
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Need help (Read 1156 times)
0 Members and 1 Guest are viewing this topic.
shakeyCZ
Guest
Need help
«
on:
June 13, 2011, 09:09:33 pm »
my forks have been refreshed fork oil and clean out, now when i brake hard the front wheel hits inside the fender would this be an air leak from the O ring at the cap? as i have not changed these, i have tried to see if air comes out but none ( but i can't repculate hard braking) springs seam ok, dose any one run preload spacers in these forks? any ideas would be great.
Logged
tony27
Legend
Posts: 1908
Re: Need help
«
Reply #1 on:
June 14, 2011, 05:01:33 am »
There used to be a pair of 5/8" sockets in my forks as spacers but when I got the bike back from a friend to start using it I ordered new springs, I'd be sure thats what you need to do
Les lists them for under $100
Logged
shakeyCZ
Guest
Re: Need help
«
Reply #2 on:
June 14, 2011, 11:43:46 am »
well I guess the spring might have lost there spring as it did sit for 14-15 years so i guess they might have a bit of sag, after i wrote the thread i did think my spring might need to be thrown in the bin!! thanks for the info Tony27
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
OzVMX Forum
»
Marque Remarks
»
CZ
»
Need help