Author Topic: RM125B forks  (Read 1628 times)

0 Members and 1 Guest are viewing this topic.

Offline suzuki27

  • Legend
  • *****
  • Posts: 853
    • View Profile
RM125B forks
« on: June 02, 2011, 06:15:52 pm »
Can anyone tell me what the fork caps look like on RM125B forks. Have they got an air valve or just plain cap. Raised or countersunk/recessed cap etc. Thanks.

Offline bazza

  • Legend
  • *****
  • Posts: 2352
    • View Profile
Re: RM125B forks
« Reply #1 on: June 02, 2011, 06:46:47 pm »
look on e/bay or google a sales brochure?
Once you go black  you will never go back - allblacks
Maico - B44 -1976 CR250- 66 Mustang YZF450,RM250
Embrace patina

090

  • Guest
Re: RM125B forks
« Reply #2 on: June 02, 2011, 07:37:50 pm »
Hex on top with an air valve straight out of the centre.

TM BILL

  • Guest
Re: RM125B forks
« Reply #3 on: June 02, 2011, 07:54:40 pm »
pretty sure 125B fork caps have the valves pointing out the front of the cap .

Offline D project

  • A-Grade
  • ****
  • Posts: 409
    • View Profile
Re: RM125B forks
« Reply #4 on: June 02, 2011, 08:06:44 pm »
Yeah , pointing to the front as there is not much clearance between the bars and triple clamps. ;)

Offline Kane Mcguire

  • A-Grade
  • ****
  • Posts: 354
    • View Profile
Re: RM125B forks
« Reply #5 on: June 02, 2011, 08:14:01 pm »
yeh i have a b according to frame number and the air caps are angled not verticle.

Offline JohnnyO

  • Legend
  • *****
  • Posts: 4658
  • Qld
    • View Profile
Re: RM125B forks
« Reply #6 on: June 02, 2011, 09:18:28 pm »
Yeah they point out to the front angled slightly upwards and have a flat section either side to put an open end spanner on.

090

  • Guest
Re: RM125B forks
« Reply #7 on: June 03, 2011, 06:47:45 am »
Yeah good on me. At least I'm right about the fact we are talking about forks ::)...aren't we? I did describe my Yamaha forks in my Maico perfectly though  :-\ As Arnie would be saying a lot these days, I'm deeply sorry about that!

Offline suzuki27

  • Legend
  • *****
  • Posts: 853
    • View Profile
Re: RM125B forks
« Reply #8 on: June 05, 2011, 02:27:00 pm »
Thanks again gents.