RM400 1mm Oversize Piston Kits

[ranchak]

I now have 1mm Oversize piston and ring kits available. The piston is a high quality cast single ring piston. Kits come with piston, ring, wrist pin and circlips. See them at:

www.anchakandsons.com


Thanks for your support!

[lukeb1961]

great to hear, Ron !

[DR]

Ron. I'll be a customer for one of those kits in the not too distant future, was checking out your stuff last night and it all looks great

Just a question, do you have spare rings to suit these 1mm kits? Aaaaand, is it at all possible to have some repro 0.50 rings made?

This is a major stumbling block with the RM400's. You can buy the 0.50 pistons by the dozen but not the ring   Unless you buy the whole kit they are simply unobtainium which has left oodles of 0.50 pistons with no rings to suit. Cheers

[ranchak]

I will be having the spare 1mm rings available ny themselves. I occasionally have .050 ring sets available, I looked into having rings made and the quantity was too high. I may eventually have a .050 piston made and then rings will be available. Any other suggestions?

[burty400]

Ron thats great news with the 1mm oversize piston.
How about making a  .75 mm oversize piston kit?

[DR]

Cheers, any chance I could put in a pre order for an 0.50 ring if/when some more do appear? 1mm overbore would be okay but my bore is good hence why I'm hunting just the ring

[oldfart]

Ron ... do they require shims  @  piston pin.   

[ranchak]

No shims required!!!!! Let me look and see if I have a set of .050 rings, I might have sold the last ones, but you never know....  I can look into having .75mm pistons made, but there has to be a need. If I can get about four or five confirmed buyers I will have them made. Any takers?

[burty400]

Ron you can put me down for 2 piston kits at .75mm plus 2 spare rings.

[ranchak]

I will do that, now only three more to go and you guys can have .75mm piston kits. I also have reproduction centercase, clutch cover and head gaskets.

[oldfart]

count me in for a .75 plus a spare set of rings

[Mutch]

Yes and the same with me Ron

[ranchak]

Thanks guys, let me get a lead time on the .75mm pistons and maybe I'll do an introductory buy.