Author Topic: RM125 Kickstarter (Read 1541 times)

Davey Crocket · « **on:** February 25, 2011, 08:34:48 am »

OK all you Suzuki nuts out there, is there an alloy kickstart lever that fits an RM125T....they have the bolt that goes through the end of the shaft, not the split type....cheers in advance DC.

asasin · « **Reply #1 on:** February 25, 2011, 12:52:53 pm »

i frigged a later one "d" model I think top onto the T bottom.

oldfart · « **Reply #2 on:** February 25, 2011, 04:34:42 pm »

DC slip into S/wood suzuki and rumage thru parts bin. I tried to match up a 91model to my 250 T and they seem to be out by 1/2 a tooth ( either too far forward or too far back ) ....not cheap either

mainline · « **Reply #3 on:** February 25, 2011, 08:13:04 pm »

does it have to be alloy? wouldn't a PE175 kickstarter fit?

DR · « **Reply #4 on:** February 25, 2011, 11:21:45 pm »

my guess is it HAS to be alloy Paul

mainline · « **Reply #5 on:** February 25, 2011, 11:33:10 pm »

couldn't he just not eat one pie?

PERM250 · « **Reply #6 on:** February 26, 2011, 03:55:23 pm »

pies not sure. but donut he lives on them dunkin things ha ha cd 7 he had his own box full.

Davey Crocket · « **Reply #7 on:** February 26, 2011, 07:47:12 pm »

Its not the pies Paul......its everthing else.

DR · « **Reply #8 on:** February 26, 2011, 08:48:22 pm »

I saw that box.....

OzVMX Forum

Author Topic: RM125 Kickstarter (Read 1541 times)

Davey Crocket

RM125 Kickstarter

asasin

Re: RM125 Kickstarter

oldfart

Re: RM125 Kickstarter

mainline

Re: RM125 Kickstarter

DR

Re: RM125 Kickstarter

mainline

Re: RM125 Kickstarter

PERM250

Re: RM125 Kickstarter

Davey Crocket

Re: RM125 Kickstarter

DR

Re: RM125 Kickstarter