Another stray dog finds a new home

[oldfart]

Bit rough around the edges but she has plenty of potential   It's rm 250 1977  which will end up being my pre 78 ride.
As you can see it's missing a air box so if anyone can put me onto one it would be much appreciated . Vintage Suzuki have reproductions but have been advise I  need mounting hardware along with a cage .
Not too sure if it has correct tank as filler is centre and i thought they where a tad off centre ( to RHS )
 

[Davey Crocket]

A tank Stu.

[suzuki27]

The A had the centre hole in tank from memory ,but the rest looks like a  B .
The engine on the B is much better I reckon.

[suzuki27]

The filter cage and mounting plate etc is still available NOS and I will have a look for an airbox.

[Davey Crocket]

He knows that agent 27....it's just he's a tightarse plumber......he wants someone to cough it all up for $15.....

[oldfart]

Thanks 27 ...I know I can buy the filter assembly NOS but it's the air box bits that elude me .
Crocka shit, I'm penny less after you fleeced me the other day 

[Davey Crocket]

As he drove away in his brand new ute!!

[SAABCOMBI]

was the photo taken from the roof top of your house.

[suzuki27]

Thanks for the tip DC- I will adjust the price accordingly!!!!

[oldfart]

David , almost    taken from rear deck. And just for you a ground level shot 
Pulled the barrel of and it's had a fresh rebore .05 of which still has hone marks.
It's pulled a head stud at  and blown a head gasket  which probably saved it's life
 it appears a low hour motor with unmolested case screws 

[oldfart]

split the cases today and discovered a chipped teeth and badly worn dogs  .. all is not lost Oldie  should have something lying around that will fit.
Problem being is I have too much.     
Ah here we go a Rm 250 T gear set drops straight in and using the B  shift forks & drum  it works a treat  .... Primary drive  has same amount of teeth .

[oldfart]

Stripped the  frame down and found a bit of rust under foot peg RHs  , rest of frame was pretty solid 
Drilled a series of 1/8 holes until I found solid metal .
 


 

[PERM250]

GREAT WORK STU SHOULD TURN OUT GREAT

[SAABCOMBI]

thanks old fart, now l can see it, what a good find.