Author Topic: 1975 Husqvarna 400 (Read 2693 times)

Glenn G · « **on:** October 02, 2015, 12:32:35 am »

Hi anyone out there fitted power dynamic system to The original femsa ign Glenn

grouty · « **Reply #1 on:** October 02, 2015, 11:25:47 pm »

The only after market ignition I have fitted to my Husky's is the Electrex World. Not much help am I :-)
Have you tried the question on cafehusky (vintage left kickers section) ?

bigk · « **Reply #2 on:** October 03, 2015, 02:25:57 pm »

Doesn't matter much what brand Electronic ignition you use, should be just a simple swap over if it's listed for the application. I have swapped later model Husky motoplats on early Femsa points equipped Huskies with no issues.
K

KTMaico · « **Reply #3 on:** October 04, 2015, 03:00:21 pm »

Read the instructions Glenn, it is not that difficult if you have the right unit for your bike.

Kevin

grouty · « **Reply #4 on:** October 05, 2015, 06:00:26 am »

There are a series of 6 videos referring to the fitting of one ....

https://www.youtube.com/watch?feature=player_detailpage&v=MpPs9CndsyQ

This is the first one. The end of this will link to the next.

Glenn G · « **Reply #5 on:** October 06, 2015, 04:02:01 am »

Hi guys thanks for all the info got it sorted runs like a treat cheers

OzVMX Forum

Author Topic: 1975 Husqvarna 400 (Read 2693 times)

Glenn G

1975 Husqvarna 400

grouty

Re: 1975 Husqvarna 400

bigk

Re: 1975 Husqvarna 400

KTMaico

Re: 1975 Husqvarna 400

grouty

Re: 1975 Husqvarna 400

Glenn G

Re: 1975 Husqvarna 400