Hagon Front Hub

[Rosco86]

Restoring a hagon at the moment, it came with a speedway front wheel, looking for a front hub or complete wheel. The backing plate has two lugs which locate either side of the fork tube. Any suggestions? Will also need a rear hub, but an probably make an mx hub fit, although the sprocket alignment is always interesting.

[firko]

Ross, I'm  intending to use a 23" Honda XL250 S wheel on my Antig Maico resto...you can get 'em pretty easily but I'm assuming you want the pukka real thing. I'm going to use my Antig hubs on a pre 65 project myself but you might get lucky giving Jonesy a call. He's got more than a few Hagons. Failing all of the above, REH and Rickman hubs are as close as buggery to the Hagon original to fool the white overall anals. Same for the rears.

[Curly3]

Rosco, I think Suzuki A100 hubs will lace straight into the standard rim?

[Rosco86]

Thanks Firko and Curly. You know me too well Mark, I  try to get as close as possible to original but with a little extra bling.Will give Alan a try. Failing that I will try Antig in the UK to see what they might have and then go to the REHs. Who would you recommend as a supplier?

[jimg1au]

rosco
ebay will be yor freind as antig dont sell (not in cat) braked hubs
jim

[firko]

Ebay is your best bet for Rickman and REH hubs Ross. Factor in around $50-$70 each. The were once cheaper but the Pom pre 65 crowd got onto them, raising the prices.

[jimg1au]

mark
the brake plate rosco wants is different to the antig one i have had both
jim

[pancho]

I've been told that the front wheel on my Elstar is of a Honda 125, it's 23"           -pancho.