montesa cappra 250 1969 5 speed

[jimg1au]

no
they will befinished as it left the factory

[jimg1au]

6 sleeps to go then off to the usa and the montesa cappra 5 speed.will also be calling in on firkos mate with the 360 as well on the way to dan rouits
jim

[SAABCOMBI]

Does anybody know where l can purchase cush drive rubbers i need them for my rear wheel (for my 67 model monty.33m )

[monte34]

I have been lucky enough to find a 53m frame and matching motor. Its in rough condition and requires some parts such as seat and guards and sidecovers. Most of the pictures of these bikes show the rear of the frame extending past the seat similar to a later grey tank 63m. My frame stops at the shock mounts and has a chrome loop that bolts on and supports the rear guard. Can someone identify what model this is, I assume it is a 1968 orange tank/ white frame 250 4speed cappra gp but stand to be corrected. Any help to locate the missing parts will result in my undying admiration.
Cheers, Rob

[hitatreeonce]

68 has bolt on rear loop 69 its as per 63m got parts for them if you need them

I have been lucky enough to find a 53m frame and matching motor. Its in rough condition and requires some parts such as seat and guards and sidecovers. Most of the pictures of these bikes show the rear of the frame extending past the seat similar to a later grey tank 63m. My frame stops at the shock mounts and has a chrome loop that bolts on and supports the rear guard. Can someone identify what model this is, I assume it is a 1968 orange tank/ white frame 250 4speed cappra gp but stand to be corrected. Any help to locate the missing parts will result in my undying admiration.
Cheers, Rob

[jimg1au]

my cappra 250 1969 5 speed roller arrived today last i saw it it was in nevada near the ca border the motor is still there but it is finished being rebuilt ready for testing.the roller is now in my garage in sydney nsw.it had a nice stay in la before its cruise on the pacific seing all the sites from inside its container.
now to restor the roller ready for the motor to land in feb/march. then off to nepean for tests
anyone got any dirt track gearing for a 5 speed monty
jim

[Curly3]

Hold it flat & 2nd gear out of the start.

[sprint76]

Well Jim hope you have more joy with your Monty than I did.
I am considering doing the unthinkable and putting a alternative power sorce in the bloody thing.

[matcho mick]