Author Topic: How much oil for a CR 250 83 model (Read 1867 times)

mick25 · « **on:** December 23, 2009, 05:12:07 pm »

My mate has a HONDA CR 250 1983 model, how many mills of gear box oil should it hold ?
it has no oil amount written on the clutch cover like most bikes have

Hoony · « **Reply #1 on:** December 23, 2009, 05:40:34 pm »

does it have an oil level check plug ? usually a M6 bolt with a 10mm head/phillips combined.

my CR250RG (1986) takes 650cc

mick25 · « **Reply #2 on:** December 23, 2009, 06:13:44 pm »

Thanks hoon, dont no much about the check plug thing ,its a mates bike ,but my mate said some one told him behind the water pump cover theres some bolt

but we didnt take the cover off to have a look

may have to have a look and see whats there

Hoony · « **Reply #3 on:** December 23, 2009, 06:58:39 pm »

you dont have to take water pump off, its accessable from the outside. what he should have said is the bolt is on the left off the water pump casing as you are looking at the water pump. email me and i will send you a pic of location.

Rossvickicampbell · « **Reply #4 on:** December 23, 2009, 09:47:07 pm »

US manual says 0.7 qrts after draining and 0.8 qrts after reassembly - just check on the conversion but I got about 650ml and 760ml respectively.

Hope that helps.

cheers

mick25 · « **Reply #5 on:** December 24, 2009, 08:43:32 am »

Thanks guys for your help

STW996 · « **Reply #6 on:** December 29, 2009, 09:07:42 pm »

RVC is on the money around 650cc drained.

Shane

OzVMX Forum

Author Topic: How much oil for a CR 250 83 model (Read 1867 times)

mick25

How much oil for a CR 250 83 model

Hoony

Re: How much oil for a CR 250 83 model

mick25

Re: How much oil for a CR 250 83 model

Hoony

Re: How much oil for a CR 250 83 model

Rossvickicampbell

Re: How much oil for a CR 250 83 model

mick25

Re: How much oil for a CR 250 83 model

STW996

Re: How much oil for a CR 250 83 model