« previous next »
Pages: [1]   Go Down

Author Topic: 400mm gas shocks  (Read 1719 times)

0 Members and 1 Guest are viewing this topic.

Offline frostype400

  • Legend
  • *****
  • Posts: 2496
    • View Profile
400mm gas shocks
« on: October 31, 2009, 11:51:51 pm »
I am after some shocks of around 400mm or a fraction longer. If you have anything let me know rebuilding wouldn't matter any shocks will do but preferably gas with a piggyback or remote reservoir even rm400 shocks may be good thanks, Michael.
Logged
1971 tm400 and PE's

Offline frostype400

  • Legend
  • *****
  • Posts: 2496
    • View Profile
Re: 400mm gas shocks
« Reply #1 on: November 01, 2009, 10:43:05 am »
Ok I will wait and see thanks, Michael.
Logged
1971 tm400 and PE's

Offline suzuki27

  • Legend
  • *****
  • Posts: 853
    • View Profile
Re: 400mm gas shocks
« Reply #2 on: November 01, 2009, 05:20:37 pm »
Hi Frosty, I have some piggy back Ohlins -early 80's. They have been rebuilt by Mr Pons. Shafts,seal heads, bump stops,spherical bearings etc. They come with 8mm reduction bushes- for the RM they were on. They are 405mm in length from mid-eye to mid-eye. Used once since rebuild. I am after $800.00 for them. Let me know if you are interested and I can e-mail some pics.
Logged

oldfart

  • Guest
Re: 400mm gas shocks
« Reply #3 on: November 01, 2009, 05:25:22 pm »
What travel do they offer ???? ( piston )
Logged

Offline frostype400

  • Legend
  • *****
  • Posts: 2496
    • View Profile
Re: 400mm gas shocks
« Reply #4 on: November 01, 2009, 07:17:09 pm »
Hi suzuki27 might be a little out of my price range at the moment thanks alot Michael. :)
Logged
1971 tm400 and PE's

Offline frostype400

  • Legend
  • *****
  • Posts: 2496
    • View Profile
Re: 400mm gas shocks
« Reply #5 on: November 21, 2009, 05:37:16 pm »
I am still chasing some rear shocks I hope to get some before December 6th if possible Because I cannot put my sidecovers on with the cheapies I have on at the moment send me a pm if you have something around 400 to say 430 mm thanks alot Michael. :)
Logged
1971 tm400 and PE's

Offline frostype400

  • Legend
  • *****
  • Posts: 2496
    • View Profile
Re: 400mm gas shocks
« Reply #6 on: November 23, 2009, 08:46:43 am »
I am still after some shocks but have found I can use shorter ones aswell as low as about 380mm If you have any spare sets lying around let me know thanks Michael. :)
Logged
1971 tm400 and PE's
Pages: [1]   Go Up
« previous next »