Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - HL400

Pages: [1] 2 3 4
1
Spaniards (Bultaco, Ossa, Montesa etc) / 1974 Bultaco pursang head
« on: August 02, 2021, 11:42:56 am »
Hi all, does any one have a Bultaco 1974 Mk 7 360 Model 121 -twin spark head for sale ? Still looking,   (TOP DOLLAR WILL BE PAID).

2
Maico / 1977 maico clutch adjustment
« on: February 15, 2020, 03:23:12 pm »
Hi there does any one no the starting point for the spring cup washers on a 1977 400 maico. ? and does the extra s/steel disc go  in the middle ?

3
Wanted / Pre 1978 Motocross bike wanted
« on: November 01, 2019, 09:35:20 am »
Hi all, looking for a pre 1978 Motocross bike whats out a few suggestions   RM 370, 360 VB Montesa, YZ400 but would consider others  the fair price paid for race ready or close to.  pm me with what you have.

4
Wanted / YZ 465 H
« on: May 18, 2017, 04:47:48 pm »
Does any one have a  YZ 465 H for sale, must be almost race ready, top price paid, PM with details. 

HL

5
Yamaha / YZ 465 H
« on: May 18, 2017, 04:46:33 pm »
Does any one have a  YZ 465 H for sale, must be almost race ready, top price paid, PM with details. 

HL

6
Wanted / Wanted 1984 YZ 490 kickstarter idler gear
« on: February 22, 2016, 06:58:42 pm »
Need a Yamaha 1984 YZ490 kick starter idler gear part number 23X15651-00-00 new or a good second hand one will do.  HL

7
Wanted / Wanted 1974 CR 400 Husky
« on: January 13, 2016, 05:30:14 pm »
Wanted 1974 CR400 Husky, must be race ready or close to, the right price paid for the right bike. pm me details. 


8
Wanted / Husky CR 390 fuel tank, must be Aluminium
« on: May 19, 2015, 06:46:52 pm »
Looking for a clean 1977 to 1980 Husqvarna  CR Aluminium fuel tank don't care on the colour but must be clean, a few small dents will be ok,  top price will be paid, PM me with any photo's and price   HL

9
For Sale / CR 500 Husky parts for sale
« on: November 20, 2014, 04:59:58 pm »
1983 CR 500 and 1982 CR 250 parts for sale,  make me an offer my new project is on the way.  pm me for any more details.


1983 CR 500 Cylinder with very good 87.50 bore  $425.00

1982/ 1983 CR 250 cylinder good bore 70.94 with very clean Wossner piston   $275.00

Electrex  World  STK-018  CDI small internal rota came of the 1982 CR 250,  but will also fit the 1983  500.   $250.00

New never fitted 44mm Mikuni carby same out side diameter as the 40mm used on the 1983 CR 500 Husky  $150.00

New front sprockets one 12 one 13 and one 14 tooth front sprockets 1980 on and 2  new sprocket spacers $90.00

3 new  swing arm chain sliders 1980 on wards  $45.00

New set of SBS front brake shoes for 1983 CR 500 double leading shoe $20.00

New FOX instinct boots Black size 10 us my wife got them for Christmas for me but I hate them. She paid  $399.00 plus freight ---- now $ 325.00 inc freight.

HL

10
For Sale / 1983 CR 500 Husky
« on: September 13, 2014, 01:19:49 pm »

Hi there I have For Sale 1983 CR 500 Husqvarna
In very good race condition, but scrubs up ok as well
Has Race tech rear shocks and fork kit set up for 90 to 110 kg rider
Updated engine side covers
New rod kit mains seals and rebore 1 meeting old
These 500’s are one of the fast evo bikes on the track.

Price $5000,00 with the standard ITC shocks
Or $6000,00 with the race tech shocks  ONO
Bike is located in Vic


PM me for photos   HL


11
For Sale / 1982 CR 250 Husqvarna
« on: May 04, 2014, 12:35:42 pm »
For Sale 1982 CR 250 Husky  $3950.00

Very clean and race ready.
Set up for 100kg rider with all gear on, also I have a second set of springs for 80to 90 kg rider if needed.
Has been raced in Viper 2013 with very good success and just completed Aus champs in Toowoomba
New top end one meeting old 2014
Frame powder coated 2013
New plastics 2013
New wheel bearings and brake shoes 2013
Replaced all cables 2013
New rear 18 inch rim 2013
Race tech fork springs
Renthal bars

WR 250 fly wheel fitted to make it more rideable but I can fit the small internal fly wheel back on if need


PM me for pictures   HL

12
For Sale / Husky and PE parts
« on: January 07, 2014, 02:31:29 pm »
FOR SALE

Mikuni 38mm Flat slide carby. Can of a running CR250 Husky Very good condition.
$60.00

Mossbarger 10 petal  reed cage  with adapter block came of a 1982 CR250 Husky will fit other models
$50.00

PVL ignition came of a 1983 CR500 Husky has been used twice will fit other models part number 70053. fits
(82-88) 390cc/420AE/430 Manual,(82-87) 360 Engines (Med Shaft 15mm Crank End)
And also 1983 to 1984 CR 500 and XC 500
$200.00

New DC plastic side cover kit for 1981-82CR Husky’s white
$30.00

PE 250 Cylinder has been rebored and a new Wiseco piston kit
I think the PE is C or a N the engine number is PE250-201855
$100.00 for the lot.


PM me and I can Email pictures all prices are plus freight.  HL


13
For Sale / Huge CZ shed clean out
« on: January 19, 2013, 08:04:28 pm »
Huge CZ shed clean out sold as a job lot,  CZ 380 Parts  I have goon all Husky so these parts have to go.

 2 – CZ 380 new piston kits 82.75mm
1   CZ 380 new piston kit 82mm
1 new set 82.50 Rings
1-new base gasket
1-new head gasket
2 new 13t front sprockets
1 –new 14t front sprocket
1 new 52t rear sprocket
1 new gear lever Falta copy
1 new kick starter spring
assorted lock tabs and bolts
1 clutch spring removing tool
1 clutch hub holding tool
1 flywheel puller
1 clutch nut tool
4 set new 35mm fork seals
1 cylinder. (needs a rebore)
1  complete fly wheel and point set (used)
1 air box with no dents
and assorted used bits and pieces.

$500.00 for the lot. ONO

14
CZ / CZ 380 parts shed clean out
« on: January 19, 2013, 08:03:02 pm »
check for sale section.  HL

15
Wanted / Wanted Husky CR 250
« on: November 24, 2012, 07:12:53 pm »
Hi Husky hoarders with bikes laying in there sheds.  I am after a 1981 to 1983 Husky CR250, must be in very good condition will pay top money for the right bike.   NO wr 250's

HL

Pages: [1] 2 3 4