Show Posts

1

Husqvarna / Re: '87 WR400

« on: May 22, 2018, 12:47:00 pm »

Thanks for the tips. Ended up getting some off EvilBay.

Another question,

What exhaust's if any cross reference and fit an '87 400?

Mine has many repairs in the first 3 bends and doesn't fit up into the cylinder spigot like it should. Before I spent time/money repairing it are there other options?

Cheers Adam

2

Husqvarna / Re: '87 WR400

« on: May 16, 2018, 06:05:34 am »

Thanks Tony!

3

Husqvarna / Re: '87 WR400

« on: May 15, 2018, 04:21:45 pm »

Thanks Steve,

I have searched there and Vintage Husky and didn't see any! I am learning my way around these new sites!

Thanks
Adam

4

Husqvarna / '87 WR400

« on: May 15, 2018, 03:59:48 pm »

I have just acquired an '87 WR400 and the cylinder and head have been removed and came in a box with the bike.
Unfortunately the 4 long studs and all the nuts and bolts to attach the top end are missing.
Can anyone point me in the right direction where I could get the hardware? Anyone got any spare they want to sell?
Grateful for any assistance as this is my first foray in to Husqvarna ownership other than my modern '16 TE300.

Cheers
Adam

5

Suzuki / Re: Anyone want a 1984 PE175 Im selling

« on: February 12, 2018, 06:43:30 pm »

Wouldn't have a rocking horse poo PE speedo somewhere would you?

Adam

6

General Discussion / Re: Barry Marshall - R.I.P.

« on: October 13, 2016, 06:56:50 am »

Hi Tony,

sorry to hear of the sad news, may he RIP. Condolences.

Adam

7

General Discussion / Re: Anyone near South Windsor NSW - look at a bike for me

« on: July 05, 2016, 07:50:22 pm »

I could possibly help you out. Am available Thursday and possibly Friday this week if it helps.

Adam

8

Wanted / WANTED - KDX200 '83 - '85 RIGHT CRANKCASE HALF

« on: March 06, 2016, 12:06:56 pm »

WANTED - KDX200 '83 - '85 RIGHT CRANKCASE HALF
I am looking for a good undamaged right crankcase half for a KDX200.
Must be undamaged around oil drain thread. If anyone has a spare they are interested in selling please let me know. Happy to pay postage etc. to Sydney. Any help greatly appreciated, Cheers.

9

Wanted / Re: PE175Z Battery Box Wanted

« on: September 25, 2015, 12:19:10 pm »

Would anyone have a leed on a battery box to suit my 175Z?

Cheers
Adam

10

Tech Talk / Re: wheel alignment in forks - IT175

« on: August 30, 2015, 10:54:17 am »

Yep, adjust the rim offset, don't grind anything

11

eBay Finds / Re: Ebay item not as described.

« on: August 26, 2015, 08:22:33 am »

Alex, the guy you bought that Trail & Track is a absolute moron. I had some communication via Facebook with him about some of his mags as I was interested but he just kept playing games and it doesn't surprise me you are having dramas getting a refund from the goose.

Its unfortunate for you but keep persevering with it. I am sure there are more genuine helpful people on here that will help.

A

12

Wanted / PE175Z Battery Box Wanted

« on: July 29, 2015, 07:37:57 pm »

Just picked up a fairly original '82 PE175.

Have managed to find most of the bits that were missing. The only things left are the battery box and PE tool

I'm not even going to ask about the tool $:-\$ , but if anyone has a spare '82 battery box surplus I would be very interested.

I know we are talking expensive and hard to find, but just putting it out there if you may have one spare.

Cheers
Adam

13

For Sale / Yamaha YZ80 Sprocket Cover

« on: February 20, 2015, 09:35:26 am »

Will fit from '81 thru to the last of the old shape '92 models and also YZ60. Has scrapes and scratches as to be expected but more than useable. $35 posted anywhere in Aus.

Adam

14

For Sale / Yamaha IT175J/K Left Side Cover

« on: February 20, 2015, 09:32:24 am »

Is more blue than the pic suggests. Would polish up well and paint or decal the yellow section and it would look good. Not NOS but more than useable for a rider. $35 posted anywhere in Aus.

Adam