Messages

1

Maico / Leaking bings

« on: March 16, 2017, 08:16:19 am »

Hi guys,
wanna do a few races this year after being a no show for about 3 years
but have a carby leakage problem on the top of the bowl near the gasket
on the AW400.
Have replaced the gasket before but never changed anything so should I try doubling the gasket
or buy a new bing which I don't wanna do $$.
Or should I try another bowl ?
Any help or info much appreciated thanks Andrew.

2

Wanted / WTB Muffler Yamaha YZ80

« on: February 11, 2017, 08:43:04 am »

Hi everyone,great to be back.
Chasing after a muffler to suit Yamaha YZ80 86 model think other models fit as well.
Has to be either the stock or aftermarket version in any condition.
Thanks Andrew.

3

For Sale / Cagiva 125MX

« on: August 24, 2014, 08:44:01 pm »

A true barn find in California and cheap considering its close to the nearest port.

http://www.vintagemx.us/cgi-bin/largephoto.cgi?C=qU2Bmf8WuUwwvPq8

4

For Sale / Brad Lackey Simons on Marks

« on: August 24, 2014, 08:36:30 pm »

Brad Lackey himself is selling a heap of stuff on Marks swap meet
including the famous Simons Upside Down forks for $3,000.
Plus some other interesting things.
Too early to put up a pic maybe tomorrow.

http://www.vintagemx.us/images/photos/15502364-16070-large.jpg

5

For Sale / Re: Yamaha Parts !

« on: August 24, 2014, 08:28:04 pm »

Sorry for the late reply been out camping with the kiddies. 
Sold pending payment !

6

General Discussion / Re: 2015 pre 78 Nats

« on: August 24, 2014, 07:58:04 pm »

Raymond Terrace NSW 

7

For Sale / Re: Yamaha Parts !

« on: August 21, 2014, 07:31:06 pm »

Mid north coast NSW near Port Macquarie.

8

For Sale / Yamaha Parts !

« on: August 19, 2014, 04:10:43 pm »

Have kept these aside for a fourstroke project but just acquired one a few months back
hence the reason why im selling these items.
A complete front end for a Yamaha YZ 250G,forks,triples and brake plate and a
Yamaha YZ125c 76 tank $250 for the lot and will not separate.
Pm for details.
Will be at next Cessnock VMX meeting.
Cheers Andrew.

9

For Sale / Re: What have you got for sale or swap?

« on: August 19, 2014, 03:57:42 pm »

84 Honda CR500 250 spare parts !
2 x new silver Renthall 51 tooth back sprocket still in wrapper will suit 125-250 84 to 07 models 500 84 to 01 models retail $89
will sell for $60 each.
Rear original guard with some scratches Honda warning sticker $25   SOLD!!
Rear brake lever with wire an adjuster $30
Front and rear hubs,front has disk $50     SOLD !!
85 250 model forks $50     SOLD !!
Kick start lever $25
Clymer owners manual For all Honda CRs 83 to 87 $25
New 89 CR 500 front jt sprocket $10
Will be at the next Heaven Cessnock round Sept 7.


Cheers Andrew
 

BUMP

10

eBay Finds / HL500 Yamaha

« on: August 18, 2014, 07:52:53 pm »

http://cgi.ebay.com/ebaymotors/Yamaha-TT-HL500-YAMAHA-TT500-VINTAGE-MOTOCROSS-AHRMA-ABERG-/380976535085?pt=US_motorcycles&hash=item58b3f8962d&vxp=mtr

11

Wanted / Re: Honda 83 CR480 Part

« on: August 18, 2014, 06:22:55 pm »

Mate a work is gunna have a crack at making a replica one on the lathe.
Fingers crossed.
Still cant believe someone would leave that part out with no oil and
spacer for preload in above fork and say its race ready 

12

Wanted / Honda 83 CR480 Part

« on: August 17, 2014, 02:31:33 pm »

After the aluminium bit that the cartridge rod slides into on the inside bottom of the fork ?
Thanks Andrew.

13

eBay Finds / Nice Suzuki !

« on: August 12, 2014, 07:16:14 pm »

http://www.vintagemx.us/cgi-bin/largephoto.cgi?C=XkEFU7PnMyD9Dfdk

14

KTM / Re: Carby for 504

« on: August 11, 2014, 06:51:03 pm »

Have a 560 Rotax fourstroke with the Mikuni flatslide on it and it absolutely hammers.
Starts ok hot or cold not hesitation or flatspots,cant tell you the settings
on the carb as I haven't had the bike for very long.

15

Honda / Re: CR480 Carb Upgrades

« on: August 08, 2014, 01:22:54 pm »

How did you go with the setup on forks ?