1
Yamaha / Re: Yz490 kick starter
« on: August 09, 2020, 11:53:41 am »
try the one of your ktm380 if you still have they fit yz250h not ideal for 490 as just suitable for 250
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Tech Talk / Re: Yamaha twin leading front brake adjustment?
« on: October 28, 2019, 05:48:44 pm »
when you get it on the bike I do the final adjustments by putting a texta mark on the rod between the 2 brake arms and rotate it in small amounts in or out checking each time the hand brake lever for sponginess when ok the lever will be firm you will feel it improve when your going the right way .
3
Wanted / Re: Yz250 1979 pipe
« on: December 14, 2018, 07:53:02 pm »
hi perko do you want to sell one
4
Wanted / Re: Yz250 1979 pipe
« on: July 24, 2018, 07:31:16 pm »
yes tried him thanks Hoony , got a 400 pipe which I am adjusting to fit to get going
5
Wanted / Re: Yz250 1979 pipe
« on: July 24, 2018, 06:09:10 am »
Need in a hurry setting up bike for nationals
6
Wanted / Yz250 1979 pipe
« on: July 23, 2018, 06:31:46 pm »
Hi all
Chasing a yz250 1979 pipe
Cheers Arno
Chasing a yz250 1979 pipe
Cheers Arno
7
Yamaha / Re: YZ 400C piston
« on: January 20, 2017, 08:02:51 pm »
and the c piston is different to d and e
8
Wanted / Re: PE175 rear rim
« on: April 01, 2016, 04:40:07 pm »
just spoke to Peter Eliot his wrecking a few of these at the moment his number is 0432959914
9
Tech Talk / Re: Yamaha tank
« on: August 04, 2015, 07:45:51 pm »
the front mounts have to be moved ,I did the ones on the frame drilled out spot welds then repositioned
10
Tech Talk / Re: Mikuni 38 mm round slide
« on: April 11, 2015, 07:43:20 pm »
mikuni make a main jet extender piece that screws into needle jet before main jet there on ebay
11
Tech Talk / Re: Another reason a Hon CR500RE and other 500's ping, Getting there.
« on: December 20, 2014, 01:42:56 pm »
hi john
I recently did the squish on a 77 yz400 ,as it ran ok before this, the amount removed from the dome of head was the same as removed to get a 1mm squish. but it pinged real bad ,so I read up about it and checked comp ratio .it ended up being 22 to 1
,Shane ended up fixing for us he had to remove 18cc extra from what I had done, now its a rocket.
cheers arno
I recently did the squish on a 77 yz400 ,as it ran ok before this, the amount removed from the dome of head was the same as removed to get a 1mm squish. but it pinged real bad ,so I read up about it and checked comp ratio .it ended up being 22 to 1
,Shane ended up fixing for us he had to remove 18cc extra from what I had done, now its a rocket.
cheers arno
12
Wanted / Re: yz250 1984 stator mount
« on: December 17, 2014, 08:50:47 pm »
hi hilly
that would be great thanks, are they defiantly the same with the slots to fit into as I are going to order a new set of windings of ebay so I want to be sure I can get before I order.
cheers arno
that would be great thanks, are they defiantly the same with the slots to fit into as I are going to order a new set of windings of ebay so I want to be sure I can get before I order.
cheers arno
13
Wanted / Re: yz250 1984 stator mount
« on: December 17, 2014, 04:08:02 pm »
no 490 has external flywheel,250 is internal
14
Wanted / yz250 1984 stator mount
« on: December 17, 2014, 03:16:49 pm »
hi all
looking for the metal part that the coils slide into, only need one side but will happily take both if any were available.
they seem to be just for 84 model possibly 83 is the same or 125 .the measurement between 2 mounting holes is 86mm.
if anyone has a faulty stator there not using can you please message with price.
cheers arno
looking for the metal part that the coils slide into, only need one side but will happily take both if any were available.
they seem to be just for 84 model possibly 83 is the same or 125 .the measurement between 2 mounting holes is 86mm.
if anyone has a faulty stator there not using can you please message with price.
cheers arno
15
Husqvarna / Re: Rebound springs ; 40mm forks
« on: December 15, 2014, 04:43:33 pm »
hi peter
He must of confused it with myss your moto suspension the over price rice version.
As we know RACE TECH sell the original quality product.
He must of confused it with myss your moto suspension the over price rice version.
As we know RACE TECH sell the original quality product.