1
For Sale / Re: NOS yamaha rods
« on: April 09, 2021, 11:55:54 am »
PM sent
Just rods or full kits?
Just rods or full kits?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
For Sale / Re: Yamaha mono shock, Updated info YZ250F 1979 FOX shock
« on: April 09, 2021, 11:49:01 am »
The 250/400 used the same shock. In fact so did the 125 except it had a 10mm spacer to shorten the stroke & 2 only compression shims compared to the 3 in the 250/400. (Shorter & softer spring too) I actually ran a 250/400 shock in my 125
3
Wanted / Re: 1976 nyamaha yz 250c wheels
« on: April 09, 2021, 11:43:50 am »
The hub was used in most 250/400 YZ's, some XT/TT & IT's from 75 to 80. The difference will be the rim.
As you said originally a 2.15 but the later models had a 2.50. Not many, if any, would notice the difference.
The thing to look for is the 3 holes in between each sprocket bolt.
As you said originally a 2.15 but the later models had a 2.50. Not many, if any, would notice the difference.
The thing to look for is the 3 holes in between each sprocket bolt.
4
For Sale / YZ & IT Heaps of project bikes & parts for sale soon (I know I've said that B4)
« on: April 09, 2021, 11:33:15 am »
I've finally bit the bullet & have started clearing out "stuff" I have already sold 3 bikes/parts/projects so it is happening this time.
I have been collecting bikes/parts for nearly 20 years now, all Yamaha, most YZ, some IT
I have a bloke coming to look at a IT250/400D frame, swingarm, shock, forks, IT250D engine (Minus cyl & head) & some other bits & pieces. Also a YZ250/400D Frame, swingarm, shock & bits & pieces. If he doesn't buy then they're up for grabs.
Also one near complete IT250K (Missing muffler/silencer & a few other minor things) with an 82 engine (Easier to get pistons etc,) plus another roller and another 5L4 engine (Looks like it's just been refreshed, definitely new conrod kit) minus cylinder/head & flywheel/stator. My original idea was to take all the best stuff from both to make one good one to do Vinduros but I can no longer do MX or any other form of dirt riding so it's/they're up for sale. If the other guy doesn't buy.
Other projects for sale is a YZ100G (Rare, I know everyone says that but who's seen one?) Complete roller, great pipe & silencer, NOS cylinder, non matching cases, correct primary drive clutch & drive gear, complete TESTED CDI, tank, seat, correct front & back wheels, forks & seat base (Someone did a modern style seat cover) & an aftermarket alloy swingarm. Plus more.
I will list others as I sort out more stuff. At this stage it will be parts or project bikes. The restored stuff will be down the track.
As I said though the two frames/engines/ shocks/ etc. will be for sale if this guy doesn't buy them along with the IT250k's if he's not interested.
No pics until I know what he wants but I will list lots after this weekend
Please dont start sending me, "Do you have this?" I will list everything, over time, what I am selling.
Cheers Perko
I have been collecting bikes/parts for nearly 20 years now, all Yamaha, most YZ, some IT
I have a bloke coming to look at a IT250/400D frame, swingarm, shock, forks, IT250D engine (Minus cyl & head) & some other bits & pieces. Also a YZ250/400D Frame, swingarm, shock & bits & pieces. If he doesn't buy then they're up for grabs.
Also one near complete IT250K (Missing muffler/silencer & a few other minor things) with an 82 engine (Easier to get pistons etc,) plus another roller and another 5L4 engine (Looks like it's just been refreshed, definitely new conrod kit) minus cylinder/head & flywheel/stator. My original idea was to take all the best stuff from both to make one good one to do Vinduros but I can no longer do MX or any other form of dirt riding so it's/they're up for sale. If the other guy doesn't buy.
Other projects for sale is a YZ100G (Rare, I know everyone says that but who's seen one?) Complete roller, great pipe & silencer, NOS cylinder, non matching cases, correct primary drive clutch & drive gear, complete TESTED CDI, tank, seat, correct front & back wheels, forks & seat base (Someone did a modern style seat cover) & an aftermarket alloy swingarm. Plus more.
I will list others as I sort out more stuff. At this stage it will be parts or project bikes. The restored stuff will be down the track.
As I said though the two frames/engines/ shocks/ etc. will be for sale if this guy doesn't buy them along with the IT250k's if he's not interested.
No pics until I know what he wants but I will list lots after this weekend
Please dont start sending me, "Do you have this?" I will list everything, over time, what I am selling.
Cheers Perko
5
Yamaha / Re: Heaps of project bikes & parts for sale soon (Yes, I know I've said that before)
« on: April 09, 2021, 11:26:29 am »
Bite your tongue!
6
Yamaha / Heaps of project bikes & parts for sale soon (Yes, I know I've said that before)
« on: April 08, 2021, 07:46:31 pm »
I've finally bit the bullet & have started clearing out "stuff" I have already sold 3 bikes/parts/projects so it is happening this time.
I have been collecting bikes/parts for nearly 20 years now, all Yamaha, most YZ, some IT
I have a bloke coming to look at a IT250/400D frame, swingarm, shock, forks, IT250D engine (Minus cyl & head) & some other bits & pieces. Also a YZ250/400D Frame, swingarm, shock & bits & pieces. If he doesn't buy then they're up for grabs.
Also one near complete IT250K (Missing muffler/silencer & a few other minor things) with an 82 engine (Easier to get pistons etc,) plus another roller and another 5L4 engine (Looks like it's just been refreshed, definitely new conrod kit) minus cylinder/head & flywheel/stator. My original idea was to take all the best stuff from both to make one good one to do Vinduros but I can no longer do MX or any other form of dirt riding so it's/they're up for sale. If the other guy doesn't buy.
Other projects for sale is a YZ100G (Rare, I know everyone says that but who's seen one?) Complete roller, great pipe & silencer, NOS cylinder, non matching cases, correct primary drive clutch & drive gear, complete TESTED CDI, tank, seat, correct front & back wheels, forks & seat base (Someone did a modern style seat cover) & an aftermarket alloy swingarm. Plus more.
I will list others as I sort out more stuff. At this stage it will be parts or project bikes. The restored stuff will be down the track.
As I said though the two frames/engines/ shocks/ etc. will be for sale if this guy doesn't buy them along with the IT250k's if he's not interested.
No pics until I know what he wants but I will list lots after this weekend
Please dont start sending me, "Do you have this?" I will list everything, over time, what I am selling.
Cheers Perko
I have been collecting bikes/parts for nearly 20 years now, all Yamaha, most YZ, some IT
I have a bloke coming to look at a IT250/400D frame, swingarm, shock, forks, IT250D engine (Minus cyl & head) & some other bits & pieces. Also a YZ250/400D Frame, swingarm, shock & bits & pieces. If he doesn't buy then they're up for grabs.
Also one near complete IT250K (Missing muffler/silencer & a few other minor things) with an 82 engine (Easier to get pistons etc,) plus another roller and another 5L4 engine (Looks like it's just been refreshed, definitely new conrod kit) minus cylinder/head & flywheel/stator. My original idea was to take all the best stuff from both to make one good one to do Vinduros but I can no longer do MX or any other form of dirt riding so it's/they're up for sale. If the other guy doesn't buy.
Other projects for sale is a YZ100G (Rare, I know everyone says that but who's seen one?) Complete roller, great pipe & silencer, NOS cylinder, non matching cases, correct primary drive clutch & drive gear, complete TESTED CDI, tank, seat, correct front & back wheels, forks & seat base (Someone did a modern style seat cover) & an aftermarket alloy swingarm. Plus more.
I will list others as I sort out more stuff. At this stage it will be parts or project bikes. The restored stuff will be down the track.
As I said though the two frames/engines/ shocks/ etc. will be for sale if this guy doesn't buy them along with the IT250k's if he's not interested.
No pics until I know what he wants but I will list lots after this weekend
Please dont start sending me, "Do you have this?" I will list everything, over time, what I am selling.
Cheers Perko
7
Yamaha / Re: IT 175J intake manifold
« on: February 08, 2020, 03:54:18 pm »
Same as YZ125G
This Yamaha 3R3-13565-00-00 JOINT, CARBURETOR Not Available fits the following models and components:
Yamaha Motorcycle 1980 YZ125G AIR CLEANER YZ125G
Yamaha Motorcycle 1980 IT175G Intake
Yamaha Motorcycle 1981 IT175H Intake
This Yamaha 3R3-13565-00-00 JOINT, CARBURETOR Not Available fits the following models and components:
Yamaha Motorcycle 1980 YZ125G AIR CLEANER YZ125G
Yamaha Motorcycle 1980 IT175G Intake
Yamaha Motorcycle 1981 IT175H Intake
8
Yamaha / Re: YZ125G Build
« on: February 08, 2020, 03:51:54 pm »
The build/s look great, well done.
Question you on one thing though
Both my YZ125G's have 38mm forks & they all look original?
So I looked up the seals & it seems you are right & I am losing my mind. 36mm
So now I'm going down the shed to check, again
Question you on one thing though
Quote
They were a big upgrade back in the day as they are 43mm compared to the wimpy 36mm original flexy forks.
Both my YZ125G's have 38mm forks & they all look original?
So I looked up the seals & it seems you are right & I am losing my mind. 36mm
So now I'm going down the shed to check, again
9
Wanted / Re: Yamaha IT175J Piston Wanted
« on: October 21, 2019, 11:03:54 am »
Dont know why that one worked though
10
Wanted / Re: Yamaha IT175J Piston Wanted
« on: October 21, 2019, 11:03:32 am »
Tried posting here but didn't like it so check PM
12
Wanted / Re: YZ125 Parts wanted
« on: October 16, 2019, 09:48:52 am »
The seat for 77-81 are basically the same, I think. I know that 77-79 are just the seat cover & I'm sure the 80-81 are too. Just the covers that are slightly different. I have sat them next to each other & I can't pick the difference.
Dont think I have a spare though
Dont think I have a spare though
14
Yamaha / Re: YZ 490 K airfilter. anyone no the part no??
« on: May 27, 2019, 10:57:06 pm »
23X-W1442-09-00
15
Wanted / Re: Yz125 barrel
« on: May 27, 2019, 10:54:42 pm »
Still after one? I'll look if you are.