Messages

1

Wanted / Ts185ER Seat

« on: April 14, 2017, 05:55:30 pm »

Chasing a 185er seat in good condition, mostly after one without rust in the pan and good foam.

Thanks.

2

Wanted / Re: Suzuki ts 185 er

« on: March 09, 2017, 06:51:17 pm »

Thanks alot, I have a tf185 one here that looks exactly the same? Will it matter that the engine number is Tf not ts when I go register it?

3

Wanted / Re: Suzuki ts 185 er

« on: March 09, 2017, 07:04:23 am »

Just the engine side case the one with the numbers. The one I have, the bike must have been layed down and bent gear leaver. They still rode it and it's worn an oval in the case and the seal continues to weep.

4

Wanted / Suzuki ts 185 er

« on: March 08, 2017, 09:36:14 pm »

Hey any one wrecking a ts185 er on the Sunshine Coast QLD?

Thanks

5

Wanted / Re: Someone to make up a aluminium washer

« on: May 11, 2016, 07:13:47 pm »

Thanks everyone, here is a picture of a spare case to show where I will be pushing the washer into first before the seal.

I have been in contact with a  guy willing to make me a couple!

Thanks alot everyone!

6

Wanted / Someone to make up a aluminium washer

« on: May 10, 2016, 10:16:40 pm »

Hey guys,

I have recently restored a 82 Suzuki ts185 ER.

When it was previously owned it was at some stage put on its side which bent the gear leaver shaft, which when continued being ridden has slowly eaten away at the aluminium guide in the side casing, so even after i have replaced the gear lever seal twice because the gear lever shaft can move around a bit it continues to leak a small amount of gearbox oil.

I am hoping someone here can make me up on a lathe or point me in the direction of someone who can make up a washer the same size of the seal that I can insert before it to keep the gear leaver center, rather then splitting the cases and replacing that half.

the oil seal size is 12mm X 22mm so would need to be the same size around 3-4mm thick.

Let me know

Thank Clayton

7

Wanted / Ts185er side plastics and speedo

« on: April 21, 2015, 06:39:24 pm »

Hey just wondering if anyone has any side plastics in good condition?
Also a speedo.
Cheers

8

Suzuki / Re: Suzuki ts185 clutch 83

« on: January 03, 2015, 08:44:54 pm »

I fixed the clutch basket and clutch yesterday which I changed the oil etc

I took for a ride after which went well.
But today while figuring out the electrics the kick start went funny as it only grabs every now and then.

Also now you have to use your hand to get it from 1st/second and it really clunks?

I did notice when riding yesterday that when going down gear/selecting first when it was in first it had a funny light grinding noise that didn't seem normal.

Any ideas?

9

For Sale / Re: ts 250 and tc 185 suzuki

« on: December 29, 2014, 08:48:17 pm »

Thanks for that Pokey, pm sent

10

Suzuki / Re: Suzuki ts185 clutch 83

« on: December 28, 2014, 01:16:03 pm »

Thanks for that, i just got some rubber and making it all now, just another question, I purchased a new filter element a uni filter one.
Do you oil these with filter oil?

Cheers

11

Suzuki / Re: Suzuki ts185 clutch 83

« on: December 27, 2014, 10:16:10 pm »

Thanks alot LWC82PE, any chance you have the parts 5 and 6 I'm missing so I can get some measurements, hopefully make something work.

Thanks Clayton

12

Suzuki / Re: Suzuki ts185 clutch 83

« on: December 27, 2014, 09:48:15 pm »

Thanks, ok I'll get some new foam for front and back.
Is another piece supposed to go here between box and filter? As there's nothing stopping dirt going past from over top or under.

13

Suzuki / Re: Suzuki ts185 clutch 83

« on: December 27, 2014, 08:43:35 pm »

Thanks alot for the reply, it didn't have much play in the rivits though it does move a little.
Yeah whatever scored the basket i think has been removed as the side cover had been taken off previously.

With the air filter is there foam or rubber that goes between the circle part / outlet of filter to seal on the inside of air box before goes into carb ?
Seems like there's a glue around the outlet circle inside air box that a seal / foam might have preciously been?

Cheers

14

Suzuki / Re: Suzuki ts185 clutch 83

« on: December 27, 2014, 06:00:00 pm »

Straitened the frame today and also got the basket off and filed it, is the basket and gear supposed to have play in the rivits holding them together?



Also how does the filter supposed to seal in the air box? It moves around in there. Guessing I'm missing parts?



Thanks

15

Suzuki / Re: Suzuki ts185 clutch 83

« on: December 26, 2014, 05:18:04 pm »

Pulled the clutch plates out today, there are little marks/ grooves defiantly not as bad as the picture pokey uploaded.

The basket seems to have play but middle doesn't? Don't think it did when plates and springs were I'm it.
I need to find a basket tool to hold it to undo the nut.

Also found the rear sub frame has taken a hit,  would it be hard to bring it back to centre?




Cheers