Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Swamper1

Pages: [1]
1
Honda / Re: CR500RE Gearbox
« on: October 15, 2014, 12:25:39 pm »

Maybe they need to update there site on some of the other gears, as this one ends in 000 on the 87 page, and 670 on the 93 page, and is compatible with the 87 on the 93 parts page  ::)


23491-ML3-670 GEAR (19T)
Description
Purchase this Honda 23491-ML3-670 GEAR (19T) --- GEAR, COUNTERSHAFT FIFTH (Honda Code 4118030), GEAR, COUNTERSHAFT FIFTH (Honda Motorcycle Code 4118030)
This Honda 23491-ML3-670 GEAR (19T) is used on these models and components:
 

1986 CR500R A TRANSMISSION

1987 CR500R A TRANSMISSION

1993 CR500R A TRANSMISSION

1994 CR500R A TRANSMISSION
 
 

2
Honda / Re: CR500RE Gearbox
« on: October 15, 2014, 11:32:47 am »
Quote from: John Orchard on October 15, 2014, 01:24:36 am
The following page might help you.  I have a couple of dodgy gears in my 84 CR500, they are the same as 85 model (KA5 model code) but the later models are ML3 model code.

It appears from this chart that 88 thru 92 have a lower 4th & 5th to all the other models before & after those years.  But I dare say that they might interchange if you use the matching gear from both shafts?  All CR500's from 84 to 01 run the same shift-forks.

http://www.thumpertalk.com/topic/801181-1991-cr500r-stock-gearing/

Thanks John. My biggest concern was that the last three digits are different on the part numbers of the 93 gears
on partzilla's page. eg 4th gear for 87 = 23461-ML3-000........4th gear for 93 = 23461-ML3-670.

3
Honda / Re: CR500RE Gearbox
« on: October 15, 2014, 09:29:58 am »

I found this an interesting site.

http://www.millarengines.com/_mnweb/Catalogue/MNetCatalogue.aspx?Guid=3af2daef-6912-493a-825f-a4402c14fda6&OwnerID=1188&CatalogueName=Default&ParentID=38194&ViewMode=Icon&NavMode=NavigatingFolders&DisplayMap=no

4
Honda / Re: CR500RE Gearbox
« on: October 14, 2014, 10:48:13 pm »
Hi,

i'm restoring a cr500 87 and may need to replace all the transmission gears....will 93 gears do the job? was looking on partzilla for parts and noticed the 93 gears were all the same teeth...i'm new to restoring..so any help would be great.

Thanks :)

Pages: [1]